Rancang Bangun Sistem Kontrol Temperatur Untuk Meningkatkan Laju Pertumbuhan Ikan Neon Tetra Dan Tanaman Egeria Densa Di Dalam Aquascape

Raganata, Dimas Akbart (2023) Rancang Bangun Sistem Kontrol Temperatur Untuk Meningkatkan Laju Pertumbuhan Ikan Neon Tetra Dan Tanaman Egeria Densa Di Dalam Aquascape. Other thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 10511910000019-Undergraduate_Thesis.pdf] Text
10511910000019-Undergraduate_Thesis.pdf - Accepted Version
Restricted to Repository staff only until 1 September 2025.

Download (2MB) | Request a copy

Abstract

Dalam pemeliharaan akuarium atau aquascape, air menjadi unsur yang paling utama dan harus dijaga dengan baik untuk keberlangsungan hidup dari mahluk hidup seperti ikan dan tumbuhan air. Mahluk hidup dalam aquascape akan hidup baik apabila air yang digunakan pada aquascape memiliki kualitas yang baik. Saat ini Aquascape menjadi trend dan hobi di kalangan masyarakat pecinta lingkungan air dan penggemar ikan karena merupakan salah satu bentuk hiburan penghilang stress setelah bekerja dan seni dalam memelihara ikan. Namun untuk perawatan aquascape sendiri cenderung sulit karena harus mempertimbangkan parameter yang sesuai dengan biota yang di dalamnya seperti temperatur yang harus dijaga dalam aquascape. Oleh karena itu, pada tugas akhir ini akan dibuat sistem kontrol temperatur dengan memonitoring PH dan oksigen terlarut pada aquascape Cooling Peltier dan Lampu HPL untuk menjaga temperatur di dalam aquascape. Sensor yang digunakan untuk mengukur temperatur, PH, dan Oksigen terlarut adalah sensor DS18B20, Sensor ph 4502C dan Sensor DO DFrobot. Pengendalian temperatur dilakukan oleh NodeMCU ESP32 menggunakan kontrol On-Off serta dilengkapi sistem monitoring melalui smartphone. Sistem kontrol pada Aquascape bekerja dengan mempertahankan temperatur pada set point 25℃. Jika hasil pengukuran temperatur tidak sesuai set point maka aktuator peltier akan menyala untuk menyesuaikan temperatur agar sesuai set point. Didapatkan karakteristik statik sensor DS18B20 dengan presentase error 1,24% dengan akurasi 98,76 %, Sensor PH 4502C dengan presentase error 0,18 % dengan akurasi 99,82% dan Sensor DO dengan persentase error 1,05 % dengan akurasi 98,95 %. Penggunaan sensor tersebut dapat mengoptimalkan sistem kontrol yang digunakan. Hasil tugas akhir ini didapatkan laju pertumbuhan ikan Neon tetra dengan menggunakan sistem kontrol yaitu pertumbuhan Panjang ikan sebesar 3,5 cm dan hasil pertumbuhan Panjang tanpa menggunakan sistem kontrol sebesar 3,2 cm. Dapat disimpulkan bahwa untuk meningkatkan laju pertumbuhan dapat menggunakan sistem kontrol temperatur pada Aquascape
=====================================================================================================================================
In maintaining an aquarium or aquascape, water is the most important element and must be properly maintained for the survival of living things such as fish and aquatic plants. Living things in an aquascape will live well if the water used in the aquascape is of good quality. Currently Aquascaping is a trend and a hobby among aquatic environmentalists and fish fans because it is a form of entertainment to relieve stress after work and the art of raising fish. However, caring for the aquascape itself tends to be difficult because you have to consider parameters that are in accordance with the biota in it, such as the temperature that must be maintained in the aquascape. Therefore, in this final project a temperature control system will be created by monitoring the PH and dissolved oxygen in the Aquascape Cooling Peltier and HPL Lamp to maintain the temperature in the Aquascape. The sensors used to measure temperature, PH, and dissolved oxygen are the DS18B20 sensor, 4502C ph sensor and DFRobot DO sensor. Temperature control is carried out by NodeMCU ESP32 using On-Off control and is equipped with a monitoring system via a smartphone. The control system in Aquascape works by maintaining the temperature at a set point of 25℃. If the temperature measurement results do not match the set point, the Peltier actuator will turn on to adjust the temperature to match the set point. The static characteristics of the DS18B20 sensor with an error percentage of 1.24% and an accuracy of 98.76% were obtained, the PH 4502C sensor with an error percentage of 0.18% and an accuracy of 99.82% and DO sensor with an error percentage of 1,05% amd am accuracy of 98,95 %. The use of these sensors can optimize the control system used. The results of this final project obtained the growth rate of Neon tetra fish using a control system, namely the growth of fish length of 3.5 cm and the results of long growth without using a control system of 3.2 cm. It can be concluded that to increase the growth rate, a temperature control system can be used in Aquascape

Item Type: Thesis (Other)
Uncontrolled Keywords: Aquascape, Control On-Off, Smartphone
Subjects: Q Science > QC Physics > QC100.5 Measuring instruments (General)
Q Science > QC Physics > QC271 Temperature measurements
Q Science > QC Physics > QC320 Heat transfer
Divisions: Faculty of Vocational > Instrumentation Engineering
Depositing User: Dimas Akbart Raganata
Date Deposited: 24 Aug 2023 02:29
Last Modified: 24 Aug 2023 02:29
URI: http://repository.its.ac.id/id/eprint/101672

Actions (login required)

View Item View Item