PENERAPAN METODE MEASUREMENT SYSTEM ANALYSIS GAUGE REPEATABILITY AND REPRODUCIBILITY (GAUGE R&R) PADA PEGUKURAN TRANSMISI PRODUK KACA PT. XYZ

SHOFI, MUHAMMAD FARID (2014) PENERAPAN METODE MEASUREMENT SYSTEM ANALYSIS GAUGE REPEATABILITY AND REPRODUCIBILITY (GAUGE R&R) PADA PEGUKURAN TRANSMISI PRODUK KACA PT. XYZ. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 1310100055-Abstract.pdf]
Preview
Text
1310100055-Abstract.pdf - Published Version

Download (97kB) | Preview
[thumbnail of 1310100055-Undergraduate Thesis.pdf] Text
1310100055-Undergraduate Thesis.pdf - Published Version
Restricted to Repository staff only

Download (1MB) | Request a copy
[thumbnail of 1310100055-Conclusion.pdf.pdf]
Preview
Text
1310100055-Conclusion.pdf.pdf - Published Version

Download (353kB) | Preview

Abstract

Dalam hal persaingan industri, suatu perusahaan harus
mampu bersaing dengan cara mengembangkan produknya,
meningkatkan kemampuan produksinya, dan selalu melakukan
pengontrolan variabilitas produk untuk menghasilkan produk
yang berkualitas dan bermutu melalui pengendalian kualitas
secara statistik. PT. XYZ merupakan salah satu perusahaan yang
bergerak di bidang glass manufacturing dan menjadi salah satu
produsen kaca terbesar di Indonesia. Produk kaca yang
dihasilkan oleh PT. XYZ dinilai dari beberapa faktor, yaitu
ketebalan (Thickness), kandungan kimia, serta transmisi.
Berdasarkan pengukuran yang sudah dilakukan oleh perusahaan,
salah satu faktor yang perlu pengawasan lebih adalah faktor
transmisi, kualitas transmisi kaca ditentukan oleh dua variabel
yaitu persentase jumlah cahaya yang dapat tembus kaca (TVA)
dan persentase energi panas yang dapat tembus kaca (TVC).
Salah satu dugaan adanya permasalahan pada faktor tersebut
adalah kurang akurat dan kurang konsisten hasil dari
pengukuran. Sehingga metode yang digunakan adalah dengan
metode Measurement System Analysis Gauge Repeatability dan
Reproducibility (Gauge R&R). pada penelitian ini dilakukan
pada jenis kaca LNFL 2.0 dengan variabel pengamatan TVA dan
TVC. Berdasarkan hasil perhitungan MSA GR&R didapatkan
sistem pengukuran pada transmisi produk kaca sudah acceptable,
viii
hal ini dapat diketahui dari nilai percent contribution, nilai
percent study varians dan nilai number of distinct categories
(ndc).

=====================================================================================================

In terms of industry competition, a company must be able
to compete with how to develop its product, increase production
capacity, and always controlling the variability of the products to
produce a quality products and high quality through statistical
quality control. PT. XYZ is one of the companies are enganged in
glass manufacturer in Indonesia. Glass product that produced by
PT. XYZ was considered from a number of factors, namely the
thickness, chemical contents, and transmission. Based on a
measurement has been carried out by the company, one of the
factors that needs to be more oversight of the transmission factor
is transmission quality of glass, the transmission quality of glass
is determined by two variables that is the percentage of light that
can be transparent glass (TVA) and the percentage heat
energy that can be transparent glass (TVC). One of the alleged
existence of a problem on these factors is less accurate and less
consistent results of measurements. So that the methods used is
the method of Measurement System Analysis Gauge
Repeatability and Reproducibility (Gauge R&R). on research
was done on the type of glass LNFL 2.0 with variable
observation TVA and TVC. Based on the result calculating MSA
GR&R obtained measurement system on the transmission of glass
product is acceptable, it can be known from value of percent
x
contribution, value of percent study variance and the number of
distinct categories (ndc).

Item Type: Thesis (Undergraduate)
Additional Information: RSSt 658.562 Sho p
Uncontrolled Keywords: Measurement System Analysis Gage Repeatability dan Reproducibility (Gauge R&R), Transmisi, TVA, TVC
Subjects: T Technology > TS Manufactures
T Technology > TS Manufactures > TS156 Quality Control. QFD. Taguchi methods (Quality control)
Divisions: Faculty of Mathematics and Science > Statistics > 49201-(S1) Undergraduate Thesis
Depositing User: Mr. Tondo Indra Nyata
Date Deposited: 04 Jan 2017 04:07
Last Modified: 04 Jan 2017 04:07
URI: http://repository.its.ac.id/id/eprint/1293

Actions (login required)

View Item View Item