Pemodelan Numerik Aliran 3 Dimensi Pada Bodi Mobil Listrik Nogogeni 6

Zulfa, Faridatus (2017) Pemodelan Numerik Aliran 3 Dimensi Pada Bodi Mobil Listrik Nogogeni 6. Diploma thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 2114030045-Non_Degree.pdf]
Preview
Text
2114030045-Non_Degree.pdf - Published Version

Download (6MB) | Preview

Abstract

Penggunaan transportasi menjadi solusi kongkrit dalam mendukung mobilitas manusia. Perkembangan teknologi otomotif yang pesat menjadikan perusahaan otomotif berlomba-lomba dalam memproduksi kendaraan yang mengutamakan keselamatan pengemudi, ramah lingkungan ,irit serta mengutamakan aspek aerodinamis. Faktor aerodinamis berpengaruh saat kendaraan sedang melaju, gaya drag yang dihasilkan harus seminimal mungkin. Nogogeni 6 dibuat untuk memenuhi kebutuhan tersebut. Nogogeni 6 dibuat menggunakan energi listrik dan mempunyai bentuk bodi yang ringan serta aerodinamis.
Untuk mengetahui karakteristik fluida yang mengalir disekitar bodi mobil Nogogeni 6, maka dilakukan pendekatan analisa numerik secara 3 dimensi menggunakan software fluent 6.3.26. Analisa numerik yang dilakukan pada bodi mobil Nogogeni 6 meliputi kontur tekanan, koefisien tekanan (Cp), koefisien drag (Cd ) serta koefisien lift (Cl).
Analisa numerik aliran yang melintasi bodi mobil Nogogeni 6 menunjukkan nilai koefisien drag (Cd) sebesar 0,19386008, dimana lebih kecil dari koefisien drag (Cd) desain bodi mobil Nogogeni 3 yaitu Cd = 0,34115342. Sedangkan untuk nilai koefisien lift (Cl) adalah sebesar 0,05273598 lebih kecil dibandingkan nilai koefisien lift (Cl) desain bodi mobil Nogogeni 3 yaitu Cl = 0,16806.
===============================================================================================
The number of vehicles has become a concrete solution to support the increase of people’s mobility. Therefore, automotive companies are competing to produce vehicles that prioritize driver safety, engine efficiency, and aerodynamic aspects. Aerodynamic factors contribute a lot when the vehicle is in motion, therefore the drag force should be minimalized. Nogogeni 6 is one of the vehicles that is specifically designed for energy efficient car. Nogogeni 6 is made for use electric power, and has a lightweight and aerodynamic body.
The numerical simulation are use to study the flow characteristic over the car body Nogogeni 6, which include pressure contour, pressure coefficient (Cp), drag coefficient (Cd) and lift coefficient (Cl) 3D with fluent software 6.3.26.
Present study concluded that analysis has been done at the body Nogogeni 6, it greatly effect to flow characteristic has a value of drag coefficient (Cd) 0,19386008. In which, the value is smaller than previous design with amount of 0,34115324. While the coefficient of lift (Cl) obtained during the simulation on the car body Nogogeni worth of 0,05273598.

Item Type: Thesis (Diploma)
Additional Information: RSMI Zul p-1
Uncontrolled Keywords: kontur tekanan, pressure coefficient (CP), drag coefficient (CD), lift coefficient (Cl) separasi, upperside, dan lowerside.
Subjects: T Technology > TJ Mechanical engineering and machinery > TJ230 Machine design
T Technology > TL Motor vehicles. Aeronautics. Astronautics
Divisions: Faculty of Industrial Technology > Mechanical Engineering > 21401-(D3) Diploma 3
Depositing User: Faridatus Zulfa
Date Deposited: 11 Dec 2017 04:54
Last Modified: 06 Mar 2019 03:41
URI: http://repository.its.ac.id/id/eprint/47105

Actions (login required)

View Item View Item