Setiawan, Zahra Luthfiah (2018) Analisis Pengaruh Media Pendingin pada Proses Pengerasan Stainless Steel 410 terhadap Sifat Mekanik dan Struktur Mikro untuk Aplikasi Hammer Crusher. Undergraduate thesis, Institute Technology of Sepuluh Nopember.
Preview |
Text
02511440000026-Undergraduate_Theses.pdf - Accepted Version Download (5MB) | Preview |
Abstract
Hammer crusher merupakan komponen penunjang penghancur raw material berupa limestone pada PT. Semen Indonesia (Persero) Tbk. Hammer crusher sering mengalami keausan yang sangat cepat dan tidak sesuai dengan umur pakainya. Oleh karena itu, penelitian ini bertujuan untuk mencari solusi dengan menganalisis pengaruh media pendingin pada proses hardening dan tempering terhadap sifat mekanik dan struktur mikro SS 410. Spesimen uji dipanaskan pada temperatur 950°C dengan waktu holding 60 menit, dilanjutkan tempering pada temperatur 250°C dengan waktu holding 60 menit. Berdasarkan proses perlakuan yang telah dilakukan, didapatkan bahwa pada proses hardening, kekerasan tertinggi diperoleh pada spesimen SS 410 H-WQ yaitu 484 HV, dan terdiri dari fasa lath martensite, dan retained austenite, sehingga menghasilkan nilai keausan yang cukup rendah, yaitu 25,66 mm/jam. Pada perlakuan hardening dan tempering, spesimen SS 410 HT-WQ memiliki nilai kekerasan tertinggi yaitu 490 HV dan terdiri dari fasa lath martensite, retained austenite, dan presipitasi karbida M23C6, sehingga menghasilkan keausan yang rendah, yaitu 21 mm/jam.
=====================================================================================================
Hammer crusher is a supporting component of crushing raw
material in the form of limestone in PT.
Semen
Indonesia
(Persero) Tbk. Hammer crusher often experi
ence very fast wear
and
doesn’t
match with the
life design
. Therefore, this
research
aims to find a solution by analyzing the effect of cooling media
on the hardening and tempering process on the mechanical
properties and microstructure of SS 410. The test
specimens were
heated at 950°C with a holding time of 60 minutes, followed by
tempering at 250°C with a holding time of 60 minutes. Based on
the treatment process, it was found that in the hardening process,
the highest hardness was obtained in specime
n
o
f SS 410 H
-
WQ
of 484 HV, and consisted of lath martensite phase, and retained
austenite, resulting in a relatively low wear rate of 25.66 mm/hr.
In hardening and tempering treatments, the SS 410 HT
-
WQ
specimen has the highest hardness value of 490 HV and c
onsists
of lath martensite, retained austenite, and carbide precipitation
M
23
C
6
, resulting in low wear
rate of
21 mm/hr.
| Item Type: | Thesis (Undergraduate) |
|---|---|
| Additional Information: | RSMt 672.36 Set a-1 3100018074210 |
| Uncontrolled Keywords: | Hammer Crusher, SS 410. Hardening, Tempering |
| Subjects: | T Technology > TN Mining engineering. Metallurgy > TN752.I5 Steel--Heat treatment |
| Divisions: | Faculty of Industrial Technology > Material & Metallurgical Engineering > 28201-(S1) Undergraduate Thesis |
| Depositing User: | Setiawan Zahra Luthfiah |
| Date Deposited: | 05 Feb 2018 02:34 |
| Last Modified: | 28 Apr 2020 02:13 |
| URI: | http://repository.its.ac.id/id/eprint/49240 |
Actions (login required)
 |
View Item |