Abriansyah, Lukman Arif (2018) Perbandingan hambatan kapal akibat penambahan Stern Flaps dan Stern Wedge pada kapal cepat monohull. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.
Preview |
Text
04211546000016-Undergraduate_Theses.pdf - Accepted Version Download (1MB) | Preview |
Abstract
Penambahan bentuk buritan menjadi bentuk Stern flaps dan Stern wedge akan berpengaruh terhadap nilai hambatan dan pola aliran yang terjadi di bagian buritan sehingga hambatan yang terjadi akan lebih kecil. Fokus dari penelitian ini adalah nilai pengurangan hambatan kapal yang dihasilkan ketika kapal beroperasi dengan stern flaps atau stern wedge. Simulasi dilakukan dengan metode Computational Fluid Dynamics (CFD) menggunakan software NUMECA Fine Marine. Hasil analisa tersebut dapat diketahui perbedaan nilai hambatan pada kapal akibat penambahan bentuk buritan dan pola aliran yang terjadi. Berdasarkan hasil simulasi yang dilakukan, kinerja bentuk stern yang paling optimal mengurangi hambatan adalah bentuk Stern flap 1%Lpp dengan sudut 4⁰. Nilai hambatan berkurang hingga 9,33 kN atau sebesar 3,5% pada kecepatan 28 knot.
=================================================================
The addition of stern design to establish Stern flaps and Stern wedge that will be affect the value of resistance and flow patterns sistem that follow in the stern so that the resistance will be reduce. The focus of this reseach is reduction in ship resistance generated when the ship operates with stern flaps or stern wedges. The simulation is done by Computational Fluid Dynamics (CFD) method using NUMECA Fine Marine software. The results of the analysis can be seen in the addition of the stern and flow patterns sistem that follow. Based on the result of simulation, the most optimal stern form performance reduces the resistance is Stern flap 1% Lpp with angle 4⁰. The resistance value is reduced to 9.33 kN or 3.5% at speed 28 knots.
| Item Type: | Thesis (Undergraduate) |
|---|---|
| Uncontrolled Keywords: | CFD, Chord, Ship Resistance, Speed, Barehull, Stern, Stern flaps, Stern wedge. |
| Subjects: | V Naval Science > VM Naval architecture. Shipbuilding. Marine engineering > VM297 Ships Designs and drawings V Naval Science > VM Naval architecture. Shipbuilding. Marine engineering > VM751 Resistance and propulsion of ships |
| Divisions: | Faculty of Marine Technology (MARTECH) > Marine Engineering > 36202-(S1) Undergraduate Thesis |
| Depositing User: | Lukman Arif Abriansyah |
| Date Deposited: | 28 Jun 2021 00:44 |
| Last Modified: | 28 Jun 2021 00:44 |
| URI: | http://repository.its.ac.id/id/eprint/56273 |
Actions (login required)
 |
View Item |