Perancangan Sistem Pergerakan Kamera Pada Pesawat First Person View (FPV)

Siswadi, Kresna Tri Jayanto and Al-Karimi, Mukhamad Ihya Uddin (2014) Perancangan Sistem Pergerakan Kamera Pada Pesawat First Person View (FPV). Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 2211030064_2211030068-Undergraduate_Theses.pdf]
Preview
Text
2211030064_2211030068-Undergraduate_Theses.pdf - Published Version

Download (3MB) | Preview
[thumbnail of 2211030064_2211030068-presentation.pdf]
Preview
Text
2211030064_2211030068-presentation.pdf - Presentation

Download (2MB) | Preview

Abstract

Pada umumnya pesawat
FPV
digunakan untuk kebutuhan hib
uran
dalam penerbangan.
Sehingga
pesawat tersebut kurang bermanfaat
,
maka dibuatlah
perancangan
sistem pergerakan kamera pada pesawat
FPV
sebagai
inovasi
yang
bermanfaat
untuk
memudahkan
survei
udara
.
Untuk merealisasikan perancangan
sistem
pergerakan kamera
ini
menggunakan
tombol
pada
remote control
yaitu
chan
nel
5 dan
chan
nel
6.
Kemudian
menggunakan
micro servo 9g
yang dipasang
pada
bagian
bawah kepala
pesawat
dan
menggunakan rangkaian penyusun yang
terhubung dengan perangkat
mikrokontroler
. Pergerakan kamera
tersebut digunakan saat pesawat diterbangkan untuk memudahkan
pemotretan.
Cara kerja dari sistem
pergerakan kamer
a tersebut yaitu
meng
gerakan servo
ke kanan
90
º setiap 15
° dalam 1s
dengan
menggunakan
channel
6 dan
mengg
erakan servo ke kiri
90
º setiap 15°
dalam 1s
menggunakan
channel
5, fungsi dari kendali remote control
pergerakan servo tersebut untuk me
mudahkan
agar pemotretan dapat
dilakukan secara leluasa tanpa mengendalikan pesawat terlebih dahulu
untuk arah kanan dan kiri.
Kemudian untuk menggerakkan
servo
ke bawah 90º yaitu dengan menekan ke arah bawah pada channel 5 dan channel 6 secara bersamaan setiap
15° dalam 1s dan menggerakkan servo ke atas 90º dengan menekan ke arah atas pada channel 5 dan channel 6 secara setiap 15° dalam 1s, fungsi dari kendali
remote control untuk pergerakan servo tersebut untuk m
emudahkan pemotretan dalam keadaan pesawat naik dan turun. Sehingga pergerakan kamera tersebut
menghasilkan gerakan sesuai dengan keinginan pada
remote control. Pengaruh dari remote control terhadap pergerakan servo tersebut yaitu remote control dapat digunakan saat tidak melebihi jarak maksimum.
Karena jarak maksimum yang dapat diakses antara remote control terhadap receiver untuk pergerakan servo adalah ±500m. Sehingga untuk pergerakan kamera
dibatasi oleh jarak maksimum. ========== FPV aircraft generally do not have the full feature
, only used
for
in-flight entertainment. So that the plane is less than helpful
, then be
made to the design of systems on the aircraft FPV camera movement
as
a useful innovation
to facilitate aerial surveys
. For realize this camera
movement system design using the buttons on the remote control that is
channel 5 and channel 6
. Then use micro servo 9g mounted on the lower
part of the head of an aircraft
and
use
the
compiler
circuit
connected to
the microcontroller
device
. The camera movement is used when aircraft
were flown for easy shooting.
The workings of the camera movement
system which moves the servo to the right 90
every 15 in 1s
by using
channel 6 and the
servo moves to the left 90
every 15 in 1s
to use
channel 5, the function of the control remote control the servo
movements so as to facilitate photo shoots can be done freely without
controlling the plane first to the right and left. Th
en to move the ser
vo
down
with the push towards the bottom on channel 5 and channel 6
simultaneously
90
evry 15 in 1s
and move the servo to over 90 by
pushing towards the top on channel 5 and channel 6 simultaneously
90
evry 15 in 1s
, the functions of the remote control to
control the
movement of the servo to facilitate shooting in a State plane up and
down
. So that
the
camera
movement
produces
movement
in accordance
with the wishes of
the remote control
. The influence from the remote
control against the servo movement, name
ly a remote control can be
used when it does not exceed the maximum distance. Because the
maximum distance that can be accessed from the remote control to the viii
receiver to the servo movement is 500 m. So for the camera movement
is limited by the maximum distance.

Item Type: Thesis (Undergraduate)
Additional Information: RSE 681.418 Sis p
Uncontrolled Keywords: Pesawat FPV, Remote Control, Mikrokontroler Micro Servo 9g, FPV Aircraft, Remote Control, Microcontroler
Subjects: T Technology > TR Photography > TR260.7 Autofocus cameras
Divisions: Faculty of Industrial Technology > Electrical Engineering > 20201-(S1) Undergraduate Thesis
Depositing User: - Davi Wah
Date Deposited: 10 Jun 2019 08:51
Last Modified: 10 Jun 2019 08:51
URI: http://repository.its.ac.id/id/eprint/63093

Actions (login required)

View Item View Item