Akbar, Farraz Haidar (2019) Pengaruh Suhu Pemadatan Terhadap Karakteristik Hasil Uji Marshall Untuk Campuran Laston Lapis Antara (AC-BC) Dengan Penambahan Plastik Tipe Polyethylene Terephthalate (PET). Diploma thesis, Institut Teknologi Sepuluh Nope.
![[thumbnail of 10111510000093-Undergraduate_Thesis.pdf]](http://repository.its.ac.id/style/images/fileicons/text.png) |
Text
10111510000093-Undergraduate_Thesis.pdf Restricted to Repository staff only Download (4MB) | Request a copy |
Abstract
Banyak penelitian yang memanfaatkan sampah plastik sebagai bahan tambahan campuran aspal. Namun dibutuhkan suhu pemadatan antara 180oC-200°C agar sampah plastik Polyethylene Terephthalate (PET) dan aspal homogen. Tujuan dari penelitian ini yakni mendapatkan suhu optimum pemadatan campuran aspal lapis antara (AC-BC) dengan suhu yang sudah ditentukan, agar penelitian sampah plastik dengan aspal ini bisa terealisasi di lapangan serta untuk mengurangi dampak pencemaran lingkungan yang ada di Indonesia. Pada penelitian ini lapisan aspal yang digunakan merupakan laston lapis antara (AC-BC). Kadar aspal optimum yang digunakan yakni 5,80% dan kadar limbah botol plastik yakni 3% dari total berat aspal. Suhu pemadatan yang digunakan yaitu 100°C - 180°C dengan interval suhu 100C dan proporsi agregat menggunakan data dari penelitian Ahmad Faqihul Muqoddam yang mengacu pada spesifikasi umum Kementrian Pekerjaan Umum Bina Marga Revisi III tahun 2010. Metode yang digunakan dalam penelitian ini merupakan metode basah. Pembuatan dan pengujian benda uji dilakukan dalam 2 tahap, yakni pembuatan benda uji tanpa penambahan dan dengan penambahan PET. Berdasarkan hasil dari penelitian ini suhu optimum pemadatan aspal konvensional 160°C dan stabilitas 1602,10 kN dan MQ sebesar 376,71 kg/mm sedangkan hasil dari aspal modifikasi dengan penambahan platisk tipe PET didapatkan suhu optimum pemadatan 180°C dengan nilai stabilitas 2547,27 kN dan MQ sebesar 629,91 kg/mm.
===========================================================================================================================
Many studies use plastic waste as an additive asphalt mixture. However, compaction temperature between 180oC-200 ° C is needed to make Polyethylene Terephthalate (PET) plastic waste and asphalt homogeneous. The purpose of this study is to obtain the optimum temperature for compaction of the intermediate layer asphalt (AC-BC) with a predetermined temperature, so that the research of plastic waste with asphalt can be realized in the field and to reduce the impact of environmental pollution in Indonesia. In this study the asphalt layer used was the intermediate laston layer (AC-BC). The optimum bitumen content used is 5.80% and plastic bottle waste content is 3% of the total asphalt weight. The compaction temperature used is 100 ° C - 180 ° C with an interval of 100C temperature and aggregate proportions using data from Ahmad Faqihul Muqoddam's research which refers to the general specifications of the Ministry of Public Works Bina Marga Revised III in 2010. The method used in this study is a wet method . The making and testing of the test object is carried out in 2 stages, namely making the test object without addition and by adding PET. Based on the results of this study, the optimum temperature of conventional asphalt compaction of 160 ° C and stability of 1602.10 kN and MQ was 376.71 kg / mm while the results of modified asphalt with the addition of PET type platypes obtained an optimum compaction temperature of 180 ° C with a stability value of 2547 27 kN and MQ of 629.91 kg / mm.
| Item Type: | Thesis (Diploma) |
|---|---|
| Uncontrolled Keywords: | Polyethylene Terephthalate (PET), Laston Lapis Antara, AC-BC, Karakteristik Marshall, Suhu Pemadatan, Polyethylene Terephthalate (PET), Laston intermediate layer, AC-BC, Marshall Characteristics, Compaction Temperature |
| Subjects: | T Technology > TA Engineering (General). Civil engineering (General) > TA441 Aggregates T Technology > TA Engineering (General). Civil engineering (General) > TA443.A7 Asphalt |
| Divisions: | Faculty of Civil Engineering and Planning > Civil Engineering > 22301-(D4) Diploma 4 |
| Depositing User: | FARRAZ HAIDAR AKBAR |
| Date Deposited: | 07 Aug 2026 03:38 |
| Last Modified: | 07 Aug 2026 03:38 |
| URI: | http://repository.its.ac.id/id/eprint/65863 |
Actions (login required)
 |
View Item |