Study eksperimental laju keausan pada 2 buah high density polyethylene (HDPE) dengan variasi normal load pada kondisi reciprocating sebagai sendi rahang (temporomandibular joint) manusia

Susastro, - (2015) Study eksperimental laju keausan pada 2 buah high density polyethylene (HDPE) dengan variasi normal load pada kondisi reciprocating sebagai sendi rahang (temporomandibular joint) manusia. Masters thesis, Institut Teknology Sepuluh Nopember.

[thumbnail of 2113205009-Dissertation.pdf]
Preview
Text
2113205009-Dissertation.pdf

Download (9MB) | Preview
[thumbnail of 2113205009-Paper-2113205009-paperpdf.pdf]
Preview
Text
2113205009-Paper-2113205009-paperpdf.pdf

Download (3MB) | Preview
[thumbnail of 2113205009-Presentation.pdf]
Preview
Text
2113205009-Presentation.pdf

Download (6MB) | Preview

Abstract

Pada banyak kasus, SDVA (single dynamic vibration absorber) hanya digunakan
untuk mengurangi getaran translasi saja. Sementara pada kasus yang kompleks sistem
juga mengalami getaran rotasi. Beberapa peneliti telah melakukan penelitian terkait
penggunaan SDVA untuk mengurangi getaran translasi. Tetapi penelitian terkait
penggunaan SDVA untuk mereduksi getaran translasi dan rotasi belum banyak dilakukan.
Pada penelitian dilakukan study pengaruh perubahan posisi masa SDVA dari titik berat
sistem utama terhadap karakteristik getaran translasi dan rotasi sistem utama. Penelitian
dimulai dengan membangun prototype sistem getaran 2 DOF, translasi–rotasi dengan
penambahan SDVA. Prototype dimodelkan secara matematis dan dilakukan simulasi
untuk mengetahui perubahan karakteristik getaran yang terjadi. Dalam simulasi diberikan
perubahan pada jarak lengan momen masa SDVA terhadap pusat masa sistem utama,
frekuensi eksitasi dan besar masa absorber yang digunakan untuk mereduksi getaran.
Untuk mengetahui kebenaran dari simulasi maka dilakukan eksperimen.
Dari penelitian ditunjukan bahwa pemberian SDVA mampu meredam getaran pada
resonansi mode pertama (rfr=1) adalah sebesar 87,51% yang terjadi saat sistem diberikan
masa absorber sebesar ms/10 dengan rl = 4,42. Penurunan getaran maksimum pada
resonansi mode kedua (rf=1) adalah sebesar 98,8% yang terjadi saat sistem diberikan
masa absorber sebesar ms/10 dengan rl = 0. Sedangkan berdasarkan optimasi yang
dilakukan ditunjukan bahwa penurunan getaran translasi dan rotasi yang paling optimum
adalah sebesar 80,5% yang terjadi saat sistem diberikan masa absorber sebesar ms/10
dengan rl = 3,5.

===================================================================================================

In many cases, SDVA (single dynamic vibration absorber) is only used to reduce
translational vibration. Meanwhile, in more complex cases, the system also experiences
rotational vibration. Some researchers have done some researches about how to reduce
translational vibration by using SDVA. But the researches about SDVA usage to reduce
translational vibration and rotation have not been widely used. This researches
performed the study of the influence in SDVA mass position changes from the main
system emphasis toward the rotational and translational vibration characteristics of the
main system. The researches started from building the prototype of 2 DOF vibrational
system, translation-rotation, and adding SDVA. The prototype is modeled
mathematically, and performs the simulation to find out any changes in the vibration.
Changes is given to the simulation in the distance between SDVA mass toward the center
of grafity system, excitational frequency, and the volume of absorber mass. To discoover
the simulation truth, an experiment is needed.
The research shows that SDVA can reduce first mode vibration resonance (rfr= 1)
for 87,5 %, which occurs when we given the primary system is given mass absorber for
ms/10 with r1 = 4,42. The maximum degreement in the second mode resonance (rf= 1) is
equal to 98,8% which occur when the primary system is given absorber mass for ms/10
with rl = 0. Whereas based optimizations performed indicated that the decrease in
translational and rotational vibration primary system most optimum amounted to 80.5%,
which occurs when the given mass absorber by ms / 10 with rl = 3.5.

Item Type: Thesis (Masters)
Additional Information: RSM 621.89 Sus s
Uncontrolled Keywords: Single dynamic vibration absorber; Getaran Rotasi; Getaran translasi
Subjects: T Technology > TJ Mechanical engineering and machinery > TJ1077 Lubrication and lubricants.
Divisions: Faculty of Industrial Technology > Mechanical Engineering > 21101-(S2) Master Thesis
Depositing User: - Taufiq Rahmanu
Date Deposited: 11 Oct 2019 06:48
Last Modified: 11 Oct 2019 06:51
URI: http://repository.its.ac.id/id/eprint/71124

Actions (login required)

View Item View Item