Hanani, Kurniansyah Rizki (2015) Kajian Pirolisis Plastik Low Density Polyethilene Dan Poly Propilene Sebagai Bahan Bakar - Study Of Pirolisis Plastic Low Density Poly Ethlene And Poly Propilene As Fuel. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.
Preview |
Text
3311100178-Undergraduate Thesis.pdf - Published Version Download (1MB) | Preview |
Preview |
Text
3311100178-Paper.pdf - Published Version Download (218kB) | Preview |
Preview |
Text
3311100078-Presentation.pdf - Published Version Download (1MB) | Preview |
Abstract
Studi Literatur ini bertujuan merumuskan konsep untuk
memanfaatkan limbah plastik jenis LDPE (Low Density
PolyEthylene) , HDPE (High Density PolyEthylene) dan PP
(PolyPropylene) sebagai bahan bakar, melalui metode pirolisis
Konsep tersebut ditunjang oleh beberapa teori yaitu prinsip kerja
cracking minyak bumi, seperti yang terdapat pada unsur kimia
plastik , sehingga memungkinkan untuk dijadikan bahan bakar
alternatif. Selain itu juga studi literatur ini bertujuan untuk
mengetahui efisiensi dari LDPE dan PP. Dalam studi literatur ini
didapatkan suhu yang digunakan untuk pirolisis plastik LDPE
bekisar antara 200-600oC. Sedangkan untuk pirolisis PP suhunya
berkisar antara 350 – 600oC. Dari hasil pirolisis antara LDPE dan
PP didapatkan bahwa PP lebih efisien sebagai bahan bakar yakni
berkisar 80% sementara LDPE berkisar 60%. Serta pemanfaatan
plastik di luar negeri menggunakan metode pirolisis dan catalic
craking sedangkan di Surabaya menggunakan metode pirolisis.
========================================================================================================================
This literature study aims to formulate a concept for the
use of waste plastics LDPE (Low Density Polyethylene), HDPE
(High Density Polyethylene) and PP (polypropylene) as fuel,
through methods of pyrolysis. The concept is supported by some
of the theories that the working principle of the cracking of
petroleum, as well as on plastic chemical elements, making it
possible to be used as alternative fuel. In addition to this literature
study also aims to determine the efficiency of LDPE and PP. In this
literature study found that temperature is used for LDPE plastics
pyrolysis ranged between 200-600oC. As for the PP pyrolysis
temperature range between 350 - 600oC. From the results of
pyrolysis between LDPE and PP showed that the PP is more
efficient as a fuel which ranges from 80% while LDPE ranges from
60%. As well as the use of plastic abroad using pyrolysis method
and catalytic craking while in Surabaya using pyrolysis method.
| Item Type: | Thesis (Undergraduate) |
|---|---|
| Additional Information: | RSL 668.419 2 Han k |
| Uncontrolled Keywords: | Cathalyc Cracking, Low Density PolyEthylene, Pirolisis , dan PolyPropylene, Cathalyc Cracking, Low Density PolyEthylene, Pirolisis , dan PolyPropylene |
| Subjects: | T Technology > TP Chemical technology > TP1175.S6 Spraying Coating with plastics |
| Divisions: | Faculty of Civil Engineering and Planning > Environment Engineering |
| Depositing User: | ansi aflacha |
| Date Deposited: | 20 Nov 2019 04:53 |
| Last Modified: | 20 Nov 2019 04:53 |
| URI: | http://repository.its.ac.id/id/eprint/71913 |
Actions (login required)
 |
View Item |