Kurniawan, Hanif (2016) Pemodelan Turbin Angin Sumbu Vertikal (VAWT) Tipe H- Rotor Untuk Pembangkit Listrik Tenaga Angin Di Pulau Tabuhan. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.
Preview |
Text
4212100089-Undergraduate_Thesis.pdf - Accepted Version Download (1MB) | Preview |
Preview |
Text
4212100089-paper.pdf - Accepted Version Download (617kB) | Preview |
Preview |
Text
4212100089-presentation.pdf - Presentation Download (1MB) | Preview |
Abstract
Angin merupakan sumber energi yang tak ada habisnya yang
dalam pemanfaatannya masih perlu dikembangkan sebagai solusi
alternatif energi untuk masyarakat. Berbagai bentuk dan jenis
konversi energi angin telah banyak diteliti, namun dalam
pemanfaatan di masyarakat masih belum banyak diaplikasikan
dan dikembangkan. Seperti halnya di Kabupaten Banyuwangi
khususnya Pulau Tabuhan belum ada sistem pembangkit listrik
dari pemanfaatan sumber angin yang ada. Berdasarkan penelitian
yang ada sebelumnya, diketahui banyak jenis trubin angin yang
digunakan untuk meningkatkan efisiensi yang dihasilkan salah
satunya adalah vertical axis (VAWT). Tujuan dari skripsi ini
adalah mengetahui desain turbin angin VAWT yang sesuai untuk
pembangkit listrik di pulau tabuhan dan mengetahui pengaruh
variasi panjang chord, jumlah blade dan sudut pitch terhadap torsi
yang dihasilkan oleh turbin angin dengan perhitungan matematis.
Analisa yang dilakukan untuk melihat efek peningkatan panjang
chord, jumlah blade dan variasi sudut pitch. Hasil dari
perhitungan tersebut adalah torsi terbesar terdapat pada turbindengan panjang chord 8 meter untuk jumlah blade 3 buah dan
sudut pitch 90 yaitu sebesar 21.69 Nm.
=========================================================================================================
Wind energy is a source of endless deep utilization is still need to
be developed as an alternative solution to the energy community.
Various forms and types of wind energy conversion has been
widely studied, but in use in the community is still not widely
applied and developed. As in Banyuwangi particularly the island
of wasp has been no power generation systems from existing
wind resource utilization. Based on existing research, known to
many types of wind Trubin used to improve the efficiency of the
resulting one of which is a vertical axis (VAWT). The purpose of
this thesis was to determine the VAWT wind turbine design that
is suitable for power generation on the island wasp and determine
the effect of variation chord length, number of blades and the
pitch angle of the torque generated by wind turbines by
mathematical calculation. The analysis was conducted to see the
effect of increasing the chord length, the number and variety of
blade pitch angle. The results of these calculations is the biggest
torque found in the turbine chord length 8 meter for the amount of
3 pieces and blade pitch angle of 90 in the amount of 21.69 Nm.
| Item Type: | Thesis (Undergraduate) |
|---|---|
| Additional Information: | RSSP 621.406 Kur p 3100016067396 |
| Uncontrolled Keywords: | VAWT, chord, sudut pitch, blade, pitch angle |
| Subjects: | T Technology > TJ Mechanical engineering and machinery > TJ828 Wind turbines |
| Divisions: | Faculty of Marine Technology (MARTECH) > Marine Engineering > 36202-(S1) Undergraduate Thesis |
| Depositing User: | - Davi Wah |
| Date Deposited: | 09 Mar 2020 09:49 |
| Last Modified: | 09 Mar 2020 10:03 |
| URI: | http://repository.its.ac.id/id/eprint/75367 |
Actions (login required)
 |
View Item |