Rancang Bangun Sistem Cerdas Berbasis Cloud Pada Studi Kasus Sistem Monitoring Daya Charging Station Mobil Listrik

Wajdi, Muhammad Farid (2016) Rancang Bangun Sistem Cerdas Berbasis Cloud Pada Studi Kasus Sistem Monitoring Daya Charging Station Mobil Listrik. Undergraduate thesis, Institut Teknologi Sepuluh Nopember Surabaya.

[img]
Preview
Text
5112100194-Undergraduate_Thesis.pdf - Published Version

Download (1MB) | Preview

Abstract

Seiring dengan berkembangnya kendaraan listrik, dibutuhkan stasiun pengisian energi listrik (Electric Vehicle Charging Station) yang dilengkapi dengan infrastruktur yang baik. Pada stasiun pengisian tersebut, terdapat berbagai parameter pengukuran yang perlu dimonitor, seperti arus dan tegangan. Oleh karena itu, dalam tugas akhir ini didesain sebuah sistem monitoring dan kontrol berbasis cloud untuk memantau dan mengontrol kinerja sistem pada Charging Station ITS. Sensor untuk mengukur tegangan AC pada sistem adalah ZMPT101B. Untuk mengukur arus AC pada saluran pengisian (Torch) dan output inverter menggunakan sensor LA 55-P. Sedangkan untuk mengukur tegangan DC pada PV dan baterai menggunakan rangkaian voltage divider dan untuk mengukur arus DC menggunakan shunt resistor. Pengambilan data arus dan tegangan AC dilakukan dengan sampling sebanyak 300 data dan diambil nilai tertingginya. Sedangkan pengambilan data arus dan tegangan DC dilakukan dengan penjumlahan sampling 20 data yang kemudian di rata-rata. Hasil pembacaan sensor dikirimkan ke server untuk disimpan dalam database dan data terakhir akan ditampilkan pada aplikasi system monitoring. Pada aplikasi monitoring ini terdapat tombol switch ON/OFF untuk memutus atau menyambung aliran daya pada sistem dengan menggunakan Solid State Relay. Sistem monitoring dan kontrol ini menggunakan pemrograman Arduino IDE. Pengujian dilakukan di Charging Station ITS dengan terhubung web untuk melihat performa sensor. Error sensor teruji tidak lebih dari 5% =============================================================================================== Along with the development of electric vehicles, electrical energy charging stations required (Electric Vehicle Charging Station) equipped with good infrastructure. At the filling station, there are a variety of measurement parameters to be monitored, such as current and voltage. Therefore, in this thesis designed a monitoring and control system that is tele-monitoring to monitor and control the performance of the system at Charging Station ITS. Sensors to measure the AC voltage on the system is ZMPT101B. To measure the AC current in the drain plug (Torch) and the output inverter using sensor LA 55-P. Meanwhile, to measure DC voltage on the PV and battery using a voltage divider circuit and to measure DC current using a shunt resistor. Data retrieval of AC current and voltage is done by sampling as many as 300 data and taken its highest value. While the data collection of DC current and voltage is done by sampling 20 data summation later on average. The results of sensor readings are sent to the server to be stored in a MySQL database and the latest data will be displayed on the web interface server. In this web interface there is a button switch ON / OFF to connect or disconnect the power flow on the system by using a Solid State Relay. Monitoring and control system using the Arduino programming IDE. Tests carried out at Charging Station ITS to connect the web to see the performance of the sensor. Error sensor is tested not more than 5%

Item Type: Thesis (Undergraduate)
Additional Information: RSIf 629.229 3 Waj r
Uncontrolled Keywords: Cloud, Charging Station, Sistem Monitoring dan Kontrol
Subjects: T Technology > TJ Mechanical engineering and machinery > TJ213 Automatic control.
T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK2785 Electric motors, Induction.
T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK4055 Electric motor
T Technology > TL Motor vehicles. Aeronautics. Astronautics > TL214.T87 Automobiles--Motors--Turbochargers
Divisions: Faculty of Information Technology > Informatics Engineering > 55201-(S1) Undergraduate Thesis
Depositing User: EKO BUDI RAHARJO
Date Deposited: 16 Jun 2020 01:13
Last Modified: 16 Jun 2020 01:13
URI: http://repository.its.ac.id/id/eprint/76166

Actions (login required)

View Item View Item