Perancangan Sistem Hidrolik Pada Lift Truck Dengan Kapasitas Angkat 200 Kg Di Pt Dinamika Indonusa Prima

Wardani, Berta Bernalia Ayu Kusuma (2021) Perancangan Sistem Hidrolik Pada Lift Truck Dengan Kapasitas Angkat 200 Kg Di Pt Dinamika Indonusa Prima. Undergraduate thesis, Institut TeknologI Sepuluh Nopember.

[thumbnail of 10211710010029-Undergraduate_Thesis.pdf] Text
10211710010029-Undergraduate_Thesis.pdf - Accepted Version
Restricted to Repository staff only until 1 October 2023.

Download (5MB) | Request a copy

Abstract

PT Dinamika Indonusa Prima meruapakan perusahaan springbed yang membutuhkan lift truck untuk membantu pekerja di gudang hasil produksi yang masih dilakukan secara manual sehingga, menimbulkan resiko yang cukup besar. Oleh sebab itu, pada tugas akhir ini dilakukan perencanaan sistem hidrolik untuk lift truck. Lift truck direncanakan menggunakan bale clamp sebagai pengganti fork. Lift truck merupakan salah satu alat material handling yang umum digunakan Lift truck memanfaatkan sistem hidrolik untuk proses pemindahan barang. Sistem hidrolik akan digunakan untuk proses lifting dan clamping. Sistem hidrolik untuk lift truck berkapasitas 200 kg direncanakan dengan menganalisa secara teoritis dan simulasi menggunakan aplikasi fluidsim 4.2.Hasil dari perencanaan ini adalah rancangan sistem hidrolik yang sesuai. Dari perhitungan teoritis dipilih komponen sesuai kebutuhan seperti, penggunaan DCV 4/3 dan 3/3, daya motor 582,98 watt, tekanan pompa 30 bar, kapasitas pompa 8,5 lpm, gaya maksimum silinder angkat 2630,03 N, gaya maksimum silinder klem 1274,03 N, dan menggunakan flexible hose berdiameter 12,5 mm. Setelah itu, tahap terakhir adalah melakukan simulasi sirkuit hidrolik untuk mengetahui sirkuit dapat bekerja atau tidak.
====================================================================================================================
PT Dinamika Indonusa Prima needs a lift truck to help the workers in the production warehouse, where all works are done manually, posing a considerable risk. Therefore, in this final project, a hydraulic system design for lift trucks will be carried out. The lift truck will use a bale clamp instead of a fork. The lift truck is one of the most used material handling tools. This tool utilizes a hydraulic system to move loads. The hydraulic system will be used for the lifting and clamping process. The hydraulic system for a 200 kgf lift truck is planned by theoretical analysis and simulation using Fluisim 4.2. The result of planning this hydraulic system is to know the hydraulic system schematics that match the conditions on the field. From theoretical calculations, you can choose components according to your needs, such as motor power of 582,98 watt, pump pressure of 30 bar, pump capacity of 8,5 LPM , pump power of 470,76 watt, maximum lift cylinder force of 2630,03 N, maximum clamp cylinder force of 1274,03 N, and using a flexible hose type. After that, the last step that needs to be done is to validate the design results through hydraulic circuit simulation with Fluidsim 4.2.

Item Type: Thesis (Undergraduate)
Subjects: T Technology > TJ Mechanical engineering and machinery > TJ935 Pipe--Fluid dynamics. Tubes--Fluid dynamics
Divisions: Faculty of Industrial Technology and Systems Engineering (INDSYS) > Mechanical Engineering > 21201-(S1) Undergraduate Thesis
Depositing User: berta bernalia
Date Deposited: 14 Aug 2021 06:11
Last Modified: 14 Aug 2021 06:11
URI: http://repository.its.ac.id/id/eprint/86281

Actions (login required)

View Item View Item