Optimasi Pabrik Asam Sulfat Dari Belerang Menggunakan Proses Kontak Single Absorber Dengan Kapasitas 600.000 Ton/Tahun

Sakti, Ubaydillah Dwi and Firdiantama, Sagara (2021) Optimasi Pabrik Asam Sulfat Dari Belerang Menggunakan Proses Kontak Single Absorber Dengan Kapasitas 600.000 Ton/Tahun. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 10411710000060_10411710000094-Undergraduate_Thesis.pdf] Text
10411710000060_10411710000094-Undergraduate_Thesis.pdf - Accepted Version
Restricted to Repository staff only until 1 October 2023.

Download (1MB) | Request a copy

Abstract

Asam Sulfat adalah bahan kimia yang berbentuk cair, tidak berwarna, Asam Sulfat juga mudah larut dalam air. Asam Sulfat banyak diperlukan untuk pembuatan pupuk (pembuatan super fosfat, ammonium sulfat), pembuatan garam garam sulfat untuk sulfonasi, dan banyak digunakan dalam pengolahan minyak bumi, pharmasi, kertas, plat timah, pewarnaan tekstil dan pulp. Oleh karena itu kebutuhan Asam Sulfat semakin meningkat. Saat ini untuk mencukupi kebutuhan tersebut indonesia sendiri masih bergantung pada produk impor dari negara-negara lain untuk memenuhi kebutuhan alam negeri. Perkembangan industri kimia di indonesia mengalami peningkatan setiap tahunnya. Dengan hal itu kebutuhan bahan baku dan bahan penunjang dalam industri akan meningkat. Rumus kimia Asam Sulfat H2SO4. Asam Sulfat adalah bahan kimia yang berbentuk cair, tidak berwarna, Asam Sulfat juga mudah larut dalam air. Kapasitas pabrik asam sulfat yang akan didirikan yaitu sebesar 600.000 ton/tahun. Lokasi yang dipilih untuk pendirian pabrik ini berada di Kawasan Industri Buluminung di daerah Tambakbaja, Tuban, Jawa Timur. Pabrik yang akan didirikan menggunakan proses single absorber. Proses pembuatan asam sulfat ini dimulai dari bahan baku sulfur padat kemudian masuk kedalam melter, kemudian sulfur cair akan masuk ke dalam furnace dengan bahan bakar gas alam, didalam furnace sulfur mengalami perubahan fase daric air ke gas, setelah keluar dari furnace dilanjutkan kedalam converter yang akan merubah SO2 menjadi SO3, tahap selanjutnya SO3 akan memasuki absorber tower dan drying tower sehingga diperoleh produk asam sulfat sebesar 98%. Pabrik ini direncakan bekerja secara kontinyu selama 330 hari/tahun dengan basis 24 jam/hari. Bahan baku sulfur yang dibutuhkan sebanyak 566.353,2 kg/hari.
=========================================================================================================
Sulfuric acid is a chemical that is liquid, colorless, ulfuric acid is also easily soluble in water. Sulfuric acid is widely used for the manufacture of fertilizers (making super phosphate, ammonium sulfate), the manufacture of sulfate salts for sulfonation, and is widely used in the processing of petroleum, pharmaceuticals, paper, tin plate, textile dyeing and pulp. Therefore, the need for sulfuric acid is increasing. Currently, to meet these needs, idonesia itself still relies on imported products from other countries to meet domestic needs. The development of the chemical industry in Indonesia has increased every year. With this, the need for raw materials and supporting materials in the industry will increase. The chemical formula for sulfuric acid is H2SO4. Sulfuric acid is a chemical that is liquid, colorless, sulfuric acid is also easily soluble in water. The capacity of the sulfuric acid plant to be established is 600,000 tons/year. The location chosen for the establishment of this factory is in the Buluminung Industrial Estate in the Tambakbaja area, Tuban, East Java. The factory to be established uses a single absorber process. The process of making sulfuric acid starts from solid sulfur raw material then enters the melter, then liquid sulfur will enter the furnace with natural gas fuel, in the sulfur furnace the phase changes from water to gas, after leaving the furnace it is continued into the converter which will converting SO2 to SO3, the next stage SO3 will enter the absorber tower and drying tower so that 98% sulfuric acid is obtained. This factory is planned to work continuously for 330 days/year on a 24 hour/day basis. The sulfur raw material needed is 566,353.2 kg/day.

Item Type: Thesis (Undergraduate)
Uncontrolled Keywords: Asam Sulfat, Sulfur, Single Absorber, Sulfuric Acid, Sulfur
Subjects: T Technology > TP Chemical technology > TP155.5 Chemical plants--Design and construction
T Technology > TS Manufactures > TS176 Manufacturing engineering. Process engineering (Including manufacturing planning, production planning)
Divisions: Faculty of Vocational > 24305-Industrial Chemical Engineering
Depositing User: Sagara Firdiantama
Date Deposited: 22 Aug 2021 15:28
Last Modified: 22 Aug 2021 15:28
URI: http://repository.its.ac.id/id/eprint/88673

Actions (login required)

View Item View Item