Implementasi Sistem Kontrol Aliran Dan Tekanan Oksigen Menggunakan Logika Fuzzy Pada Reaktor Ozon

Millah, Siti Athiul (2021) Implementasi Sistem Kontrol Aliran Dan Tekanan Oksigen Menggunakan Logika Fuzzy Pada Reaktor Ozon. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

Text 10311710000068-Undergraduate_Thesis.pdf - Accepted Version Restricted to Repository staff only until 1 October 2023. Download (4MB) | Request a copy

Abstract

Kondisi pandemi Coronavirus disease (COVID-19) terus meningkat oleh sebab itu dibutuhkan perancangan peralatan yang dapat mencegah COVID-19 tersebut yaitu alat sterilisasi peralatan kesehatan. Sistem sterilisator yang ada di pasaran saat ini belum memiliki kontrol aliran dan tekanan oksigen sehingga produksi ozon tidak terkendali dikarenakan aliran dan tekanan oksigen yang akan masuk pada reaktor ozon tidak terkontrol yang menyebabkan ozon akan masuk berlebih dan tidak sesuai dengan standarisasi kadar ozon pada peralatan kesehatan.
Untuk memenuhi kebutuhan alat sterilisasi tersebut PT. Parametrik Solusi Integrasi membuat alat sterilisasi peralatan kesehatan menggunakan gas ozon (O3) dengan metode pembangkit Dielectric Barrier Discharge (DBD) dengan penambahan kontrol aliran dan tekanan oksigen menggunakan metode logika fuzzy. Kontrol aliran dan tekanan yang dilakukan pada sterilisator ini ditujukan agar aliran dan tekanan yang dihasilkan akan lebih terkontrol. Penggunaan fuzzy sebagai metode yang digunakan bertujuan untuk mendapatkan nilai laju aliran dan tekanna yang sesuai dengan set point.
Sistem sterilisasi menggunakan logika fuzzy membuat respon sesuai dengan standar yang ditentukan dan mendekati set point yang diberikan dengan nilai laju aliran 5 Lpm dan tekanan 120 kPa dengan rata- rata eror aliran oksigen sebesar 4.3% dan rata- rata eror tekanan oksigen 3,9%.
===================================================================================================
The condition of the Coronavirus disease (COVID-19) pandemic continues to increase, therefore it is necessary to design equipment that can prevent COVID-19, namely medical equipment. The sterilizer system on the market currently does not have control of oxygen flow and pressure so that ozone production is not controlled because the flow and pressure of oxygen that will enter the ozone reactor is not controlled which causes ozone to enter excessively and does not comply with the standardization of ozone levels in medical equipment.
To meet the needs of the sterilizer PT. Parametrik Solusi Integrasi makes medical equipment sterilizers using ozone gas (O3) with the Dielectric Barrier Discharge (DBD) generation method with the addition of oxygen flow and pressure control using the fuzzy logic method. The flow and pressure control carried out on this sterilizer is intended so that the flow and pressure produced will be more controlled. The use of fuzzy as the method used aims to get the value of the flow rate and pressure following the set point.
The system using fuzzy logic makes a response according to the specified standard and approaches the given set point with a flow rate value of 5 Lpm and a pressure of 120 kPa with an average oxygen flow error of 4.3% and an average oxygen pressure error of 3.9%.

Item Type:	Thesis (Undergraduate)
Uncontrolled Keywords:	Dielectric Barrier Discharge, Laju Aliran Oksigen, Tekanan Oksigen, Generator ozon, Kontroler Logika Fuzzy, Oxygen flow rate, Oxygen pressure, Ozone Generator, Fuzy Logic Controller
Subjects:	T Technology > T Technology (General) > T58.8 Productivity. Efficiency T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK1007 Electric power systems control T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK3070 Automatic control
Divisions:	Faculty of Vocational > 36304-Automation Electronic Engineering
Depositing User:	Siti Athiul Millah
Date Deposited:	23 Aug 2021 10:05
Last Modified:	23 Aug 2021 10:05
URI:	http://repository.its.ac.id/id/eprint/88838

Actions (login required)

View Item