Aprillia, Anita (2021) Implementasi Sistem Kontrol Aliran Dan Tekanan Ozon Menggunakan Logika Fuzzy Pada Box Sterilisator. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.
![[thumbnail of 10311710000091_Undergraduate_Thesis.pdf]](http://repository.its.ac.id/style/images/fileicons/text.png) |
Text
10311710000091_Undergraduate_Thesis.pdf - Accepted Version Restricted to Repository staff only until 1 October 2023. Download (4MB) | Request a copy |
Abstract
Saat ini Infeksi Coronavirus disease (COVID-19) terus bertambah maka sebab itu dibutuhkan perancangan peralatan yang dapat mencegah COVID-19 tersebut yaitu alat sterilisasi peralatan kesehatan. Sistem sterilisator yang ada di pasaran saat ini belum memiliki kontrol aliran dan tekanan ozon sehingga menyebabkan produksi ozon tidak terkendali dikarenan aliran dan tekanan ozon yang akan masuk berlebih dan tidak sesuai dengan standarisasi kadar ozon pada peralatan kesehatan. Untuk memenuhi kebutuhan alat sterilisasi tersebut PT.
Parametrik Solusi Integrasi membuat alat sterilisasi peralatan kesehatan menggunakan gas ozon (O3) dengan metode pembangkit Dielectric Barrier Discharge (DBD) dengan penambahan kontrol aliran dan tekanan ozon menggunakan metode logika fuzzy. Target yang ingin dicapai dari pengerjaan proyek akhir ini adalah sistem sterilisasi yang otomatis dan dapat diatur laju aliran, tekanan, dan kadar ppm yang dihasilkan sesuai standar sistem sterilisasi peralatan kesehatan. Aktuator yang digunakan berupa motor servo dikopel dengan valve untuk mengatur jumlah aliran ozon, tekanan ozon dan kadar ozon yang masuk dalam box sterilisator dengan metode fuzzy sebagai pengendalinya. Sistem sterilisasi menggunakan logika fuzzy membuat respon sistem sesuai dengan standar yang ditentukan dan mendekati set point yang diberikan dengan nilai kadar ozon 3 ppm, laju aliran 5 Lpm dan tekanan 120 kPa dengan rata-rata eror laju aliran ozon sebesar 8 % dan tekanan ozon sebesar 2%.
===================================================================================================
Currently the infection of Coronavirus disease (COVID-19) continues to increase, therefore it is necessary to design equipment that can prevent COVID-19, namely medical equipment sterilizers. Sterilizer systems on the market today do not have control of ozone flow and pressure, causing uncontrolled ozone production due to excessive flow and pressure of ozone that will enter and not in accordance with the
standardization of ozone levels in medical equipment. To meet the needs of the sterilizer PT. Parametrik Solusi Integrasi makes medical equipment sterilizers using ozone gas (O3) with the Dielectric Barrier Discharge (DBD) generating method with the addition of ozone flow and pressure control using the fuzzy logic method. The target to be achieved from this final project is a sterilization system that is automatic and can be adjusted to the flow rate, pressure, and ppm levels produced according to the standard medical equipment sterilization system. The actuator used is a servo motor coupled to a valve to regulate the amount of ozone flow, ozone pressure and ozone levels
that enter the sterilizer box with the fuzzy method as the controller. The sterilization system using fuzzy logic makes the system
response according to the specified standard and approaches the given set point with a value of 3 ppm ozone level, 5 Lpm flow rate and 120 kPa pressure with an average ozone flow rate error of 8% and ozone pressure of 2 %.
| Item Type: | Thesis (Undergraduate) |
|---|---|
| Uncontrolled Keywords: | Dielectric Barrier Discharge, Ozone Flow, Ozone Pressure, Ozone Generator, Fuzzy Logic Controller, Aliran Ozon, Tekanan Ozon, Generator Ozon, Kontroler Logika Fuzzy. |
| Subjects: | T Technology > T Technology (General) > T58.8 Productivity. Efficiency T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK1007 Electric power systems control T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK3070 Automatic control |
| Divisions: | Faculty of Vocational > 36304-Automation Electronic Engineering |
| Depositing User: | Anita Aprillia |
| Date Deposited: | 21 Aug 2021 00:32 |
| Last Modified: | 21 Aug 2021 00:32 |
| URI: | http://repository.its.ac.id/id/eprint/89324 |
Actions (login required)
 |
View Item |