Pembuatan Perangkat Multi-display yang Dikontrol Secara Terpusat Menggunakan Wireless

Pradipta, Awataraning Tunjung (2017) Pembuatan Perangkat Multi-display yang Dikontrol Secara Terpusat Menggunakan Wireless. Diploma thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 2214030049-NON_DEGREE.pdf]
Preview
Text
2214030049-NON_DEGREE.pdf - Published Version

Download (3MB) | Preview

Abstract

Dewasa ini, Multi-display sendiri digunakan untuk menampilkan suatu informasi. Multi-display disini disusun dari banyak layar televisi atau monitor untuk membentuk satu informasi yang utuh. Namun masih sedikit yang digunakan dalam ruang lingkup yang lebih kecil, yakni di sekolah atau di area perkantoran, karena di area tersebut juga membutuhkan suatu peyampaian informasi yang lebih efektif dan efisien.
Oleh karena itu, dibuatlah suatu tampilan Multi-display dot matrix P10 yang dapat dikontrol secara terpusat sehingga dapat menampilkan informasi. Pengontrolan secara terpusat yang dilakukan disini adalah menggunakan suatu komputer ataupun laptop yang sudah terhubung dengan modul Wireless transmitter yang terdiri atas Arduino dan XBee yang dapat digunakan untuk mengirimkan informasi menuju tampilan Multi-display. Sedangkan Multi-display disini sendiri, terhubung dengan modul Wireless receiver yang terdiri atas Arduino dan XBee yang digunakan untuk menerima informasi yang dikirimkan oleh kontrol pusat. Dimensi dari Multi-display ini adalah 64x32 cm2 dengan besar bingkai 72x42x8 cm3. Berdasar hasil pengujian, data yang dikirimkan dari PC/Laptop dan data yang diterima dan ditampilkan oleh Multi-display adalah sama. Jika data yang dikirim melebihi 63 karakter, kelebihannya tidak akan ditampilkan perangkat Multi-display. Kisaran waktu untuk menampilkannya berkisar antara 0,5 – 1,8 detik. Setelah menampilkan data yang dikirimkan, tampilannya akan kembali kepada tampilan default-nya, yaitu menampilkan jam dan tanggal, nama departemen serta nama ruang.
=============================================================================================
Today, Multi-display it self is used to display the information. Multi-display here composed of many television screen or monitor to form a complete information. But there is still little used in smaller scope, ie, at school or in the office area, because in these areas also need a peyampaian information more effectively and efficiently.
Therefore, they invented a Multi-display P10 dot matrix display that can be centrally controlled so as to display the information. Centrally controlling done here is to use a computer or laptop that is connected to the Wireless transmitter module consisting of Arduino and XBee can be used to transmit information to the multi-view display. While the Multi-display here alone, connected by Wireless receiver module which consists of an Arduino and XBee used for receiving information transmitted by the control center. The dimensions of this Multi-display is 64x32 cm2 with a large frame 72x42x8 cm3. Based on the test results, the data transmitted from the PC / Laptop and the data received and displayed by the Multi-display is the same. If the data that is sent exceeds 63 characters, the excess will not be displayed Multi-display devices. The range of time to display it ranged from 0.5 to 1.8 seconds. After displaying the data transmitted, the display will return to its default view, which displays the time and date, the department name and the name of the room.

Item Type: Thesis (Diploma)
Uncontrolled Keywords: Arduino, Multi-display P10, XBee
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK5103.2 Wireless communication systems. Two way wireless communication
Divisions: Faculty of Industrial Technology > Electrical Engineering > 20401-(D3) Diploma 3
Depositing User: Awataraning Tunjung Pradipta
Date Deposited: 11 Dec 2017 07:18
Last Modified: 06 Mar 2019 03:42
URI: http://repository.its.ac.id/id/eprint/47005

Actions (login required)

View Item View Item