Analisis Teknis Dan Ekonomis Pembangunan Kapal Ikan 30Gt Konstruksi Frp Menggunakan Laminasi Vacuum Infusion

Atmanegara, Rengga Eka Putra (2016) Analisis Teknis Dan Ekonomis Pembangunan Kapal Ikan 30Gt Konstruksi Frp Menggunakan Laminasi Vacuum Infusion. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 4111100050-Undergraduate Thesis.pdf]
Preview
Text
4111100050-Undergraduate Thesis.pdf - Published Version

Download (3MB) | Preview

Abstract

Produksi kapal ikan 30GT konstruksi FRP di Indonesia masih menggunakan metode
laminasi hand lay up. Metode hand lay up memiliki kekurangan pada kebutuhan jam orang
dan kualitas produksi. Metode vacuum infusion merupakan salah satu metode laminasi
fibreglass yang memiliki keunggulan. Tujuan tugas akhir ini adalah untuk menganalisis
secara teknis dan ekonomis produksi kapal ikan 30GT konstruksi FRP menggunakan metode
laminasi vacuum infusion. Pertama, produksi kapal ikan 30GT konstruksi FRP diobservasi.
Kedua, data produksi kapal ikan 30GT konstruksi FRP dikumpulkan. Ketiga, menganalisis
teknis dan ekonomis pembangunan kapal ikan 30GT konstruksi FRP metode laminasi hand
lay up dan vacuum infusion yang telah dilakukan. Hasil dari penerapan metode vacuum
infusion pada produksi kapal ikan 30GT konstruksi FRP mengalami pengurangan sebesar
7,26%. Kualitas produksi vacuum infusion lebih baik 22,83% dibandingkan hand lay up. Dari
hasil analisis ekonomis, biaya produksi kapal ikan 30GT konstruksi FRP metode laminasi
vacuum infusion lebih mahal 12,9% dari pada metode laminasi hand lay up. Produktivitas
tenaga kerja metode laminasi vacuum infusion lebih tinggi 24,94% dari pada metode laminasi
hand lay up. Pembangunan galangan kapal konstruksi FRP metode vacuum infusion
membutuhkan biaya investasi sebesar Rp 14.383.141.000 dan Payback Period (PP) pada
tahun ke-10.
===============================================================================================
Production of FRP construction 30GT fishing vessels in Indonesia are commonly
using hand lay-up lamination method. Hand Lay Up method has weaknesses in manhours
consumption and product quality. Vacuum infusion is one of many lamination methods which
has many advantage. The main objective of this final project is to analyse technics and
economics of the production FRP construction 30GT fishing vessels using vacuum infusion
lamination method. Firstly, the production of FRP construction of 30GT fishing vessels was
observed. Secondly, data of FRP construction of 30GT fishing vessels were collected. Thirdly,
technical and economical analysis of production of the FRP construction 30GT fishing
vessels using hand lay up and vacuum infusion lamination method was conducted. As a result,
decreased of manhours in production of FRP construction 30GT fishing vessels using vacuum
infusion is about 7,26%. The Product quality of vacuum infusion is 22,83% higher than those
of hand lay up. In term of economical analysis, the cost of production FRP construction 30GT
fishing vessels using vacuum infusion lamination method is 12,9% more expensive than those
of hand lay-up lamination method. Labour productivity of vacuum infusion lamination method
has 24,94% higher than those of hand lay-up lamination method. The development of
shipyard FRP vessels vacuum infusion method needs investment cost of Rp. 14.383.141.00
and Payback Period of tenth years.

Item Type: Thesis (Undergraduate)
Additional Information: RSPe 620.192 3 Atm a
Uncontrolled Keywords: Fibre Reinforced Plastic (FRP), kapal ikan 30GT , dan vacuum infusion
Subjects: V Naval Science > VC Naval Maintenance > VC 270-279 Equipment of vessels, supplier,allowances,etc
V Naval Science > VM Naval architecture. Shipbuilding. Marine engineering
Divisions: Faculty of Marine Technology (MARTECH) > Naval Architecture and Shipbuilding Engineering > 36201-(S1) Undergraduate Thesis
Depositing User: Mr. Tondo Indra Nyata
Date Deposited: 21 Aug 2017 08:40
Last Modified: 26 Dec 2018 06:42
URI: http://repository.its.ac.id/id/eprint/48699

Actions (login required)

View Item View Item