Analisis Konsistensi Hasil Risiko Teknologi Informasi Failure Mode And Effect Analysis (FMEA)

Najwa, Nina Fadilah (2018) Analisis Konsistensi Hasil Risiko Teknologi Informasi Failure Mode And Effect Analysis (FMEA). Masters thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 05211650012003-Master_Thesis.pdf]
Preview
Text
05211650012003-Master_Thesis.pdf - Accepted Version

Download (5MB) | Preview

Abstract

Failure Mode and Effect Analysis (FMEA) merupakan salah satu metode dalam manajemen risiko yang dapat digunakan dalam berbagai bidang seperti industri manufaktur dan jasa, organisasi profit dan non profit, organisasi private, publik, ataupun organisasi pemerintahan. Beberapa penelitian mengkritisi metode FMEA karena terdapatnya limitasi atau kelemahan dari penggunaan FMEA terutama pada isu konsistensi. Jika FMEA digunakan secara tidak tepat atau terdapatnya hasil yang tidak konsisten, akan memberikan kerugian pada organisasi. Hal ini dikarenakan, prioritas risiko membutuhkan biaya yang lebih besar pada risiko peringkat tertinggi. Perbedaan peringkat risiko tersebut dapat terjadi kesalahan dalam pencegahan atau fokus penanganan. Tujuan dari penelitian ini adalah untuk memberikan kontribusi penelitian dengan mensintesis kerangka FMEA untuk meminimalisir isu konsistensi dan subjektifitas dalam manajemen risiko.
Penelitian ini menggunakan dua siklus action resereach (plan, act, observe, reflect). Siklus pertama pada action research untuk menguji dan membuktikan konsistensi FMEA Tradisional. Tahapan dalam analisis konsistensi adalah dengan menganalisa risiko TI oleh dua tim yang berbeda pada studi kasus yang sama. Perbedaan peringkat risiko yang dilakukan oleh kedua tim akan dianalisis kesenjangannya dan diberikan usulan perbaikan. Kemudian dilanjutkan dengan siklus action research yang kedua, yaitu untuk mengimplementasikan kerangka FMEA yang telah disintesiskan. Tahapan awal dengan melakukan sintesis kerangka FMEA yang diperbaiki berdasarkan hasil analisis gap dan studi literatur yang dilakukan. Kemudian, perbaikan kerangka FMEA tersebut diimplementasikan kembali sebagai validasi empiris.
FMEA Tradisional berdasarkan hasil action research siklus pertama terbukti tidak konsisten. Hal ini dikarenakan hasil RPN tim pertama terdapat 3 risiko pada tingkatan very high sedangkan tim kedua terdapat 7 risiko pada tingkatan very high. Pada siklus action research 2 terbukti bahwa hasil pengukuran risiko dengan FMEA improvement lebih konsisten. Hasil RPN yang didapatkan oleh kedua tim adalah sama, sehingga dapat disimpulkan kelemahan FMEA dapat terminimalisir dengan menerapkan kerangka perbaikan FMEA Improvement.
==========================================================================================================
Failure Mode and Effect Analysis (FMEA) was one of the methods in risk management that could be used in various fields such as manufacturing and service industries, profit and non profit organizations, private organizations, public, or governmental organizations. Some studies have criticized the FMEA method because of the limitation or weakness of FMEA usage, especially on the issue of consistency. If FMEA is used improperly or inconsistent results will result in loss to the organization. This was because, the priority of risk requires a greater cost at the highest risk of ranking. These risk ranking differences could occur errors in prevention or focus on handling. The purpose of this study was to contribute research by synthesizing the FMEA framework to minimize the issue of consistency and subjectivity in risk management.
This research used two cycles of action resereach (plan, act, observe, reflect). The first cycle in action research to test and prove the consistency of Traditional FMEA. The stages in the consistency analysis were to analyze IT risk by two different teams in the same case study. Differences in risk ratings made by both teams would be analyzed for gaps and proposed improvements. In the second action research cycle, the process was to implement the synthesized FMEA framework. Initial stages by performing an improved FMEA frame synthesis based on gap analysis results and literature studies conducted. Then, the improvement of the FMEA framework was re-implemented as empirical validation.
Traditional FMEA based on the results of the first action research cycle proved inconsistent. This was because the first team RPN had 3 risks at very high levels while the second team had 7 risks at very high levels. In the second action research cycle, it was proven that risk measurement result with FMEA improvement was more consistent. The RPN results obtained by both teams were similar, so it could be concluded that FMEA weakness could be minimized by applying the FMEA Improvement methodology.

Item Type: Thesis (Masters)
Additional Information: RTSI 658.403 8 Naj a-1 3100018078756
Uncontrolled Keywords: FMEA, Konsistensi FMEA, Risiko TI
Subjects: H Social Sciences > HD Industries. Land use. Labor > HD30.213 Management information systems. Dashboards. Enterprise resource planning.
H Social Sciences > HD Industries. Land use. Labor > HD61 Risk Management
Divisions: Faculty of Information and Communication Technology > Information Systems > 59101-(S2) Master Thesis
Depositing User: Nina Fadilah Najwa
Date Deposited: 05 Dec 2018 15:58
Last Modified: 01 Oct 2020 06:22
URI: http://repository.its.ac.id/id/eprint/53284

Actions (login required)

View Item View Item