Pemodelan Geostatistik 3D Pada Sebaran Batuan Karbonat Berdasarkan Data Resistivitas (Studi Kasus: Kecamatan Jenu, Kabupaten Tuban)

Aisha, Fahrenzy Yona (2018) Pemodelan Geostatistik 3D Pada Sebaran Batuan Karbonat Berdasarkan Data Resistivitas (Studi Kasus: Kecamatan Jenu, Kabupaten Tuban). Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 3714100046-Undergraduate_Thesis.pdf]
Preview
Text
3714100046-Undergraduate_Thesis.pdf - Accepted Version

Download (4MB) | Preview

Abstract

Metode Geofisika memainkan peran yang penting dalam bidang ilmu kebumian, terutama dalam menentukan struktur bumi. Dalam dunia eksplorasi, metode geofisika digunakan untuk mengestimasi sebaran sifat fisika material penyusun bumi tidak terkecuali metode geolistrik. Umumnya, metode geolistrik dilakukan untuk mengestimasi struktur bumi dalam 1D dan 2D. Seiring berjalannya waktu, kebutuhan terhadap data keadaan bawah permukaan yang lebih terkarakterisasi dengan detail dan menerus semakin meningkat. Sementara, harga yang tinggi saat melakukan akuisisi geolistrik 3D terkadang menjadi kendala dalam eksplorasi. Oleh sebab itu, diperlukan hasil penampang yang mendekati kondisi riil-nya yakni pemodelan dalam bentuk 3D berdasarkan data 2D. Untuk dapat memprediksi pola sebaran data di antara titik ukur atau antara penampang, diperlukan aplikasi metode geostatistik. Metode Geostatistik yang digunakan adalah kriging dan Two Point Statistic (TPS). Sementara itu, untuk validasi model volumetrik dilakukan integrasi dengan nilai Standard Penetration Test (N-SPT) untuk melihat korelasi spasial antar model. Data kemudian dilakukan interpretasi secara kualitatif dengan mengintegrasikan dengan kondisi geologinya. Tujuan penelitian ini adalah untuk mengetahui pseudo 3D resis yang dapat menggambarkan bawah permukaan secara 3D dari data 2D. Kombinasi antara hasil dari survei geofisika dan geologi ini dapat menghasilkan persebaran distribusi karbonat di daerah penelitian yakni Kabupaten Tuban, Kec. Jenu. Perbandingan antar metode dilakukan dengan memvalidasi data dengan bor N-SPT pada tiap variasi lintasan. Sehingga menghasilkan model 3D metode TPS lebih sesuai dengan spasial N-SPT dibandingkan dengan model 3D metode kriging. Kemudian, berdasarkan model persebaran karbonat mengindikasikan bahwa lingkungan penelitian ini memiliki jenis karbonat reefal dengan kombinasi batuan gamping dan dolomit. ========================================================
Geophysical methods play an important role in the field of earth science, especially in determining the structure of the earth. In the world of exploration, geophysical methods are used to estimate the distribution of the physical properties of the constituent materials of the earth, not to mention geoelectric methods. Generally, geoelectric methods are performed to estimate the earth's structures in 1D and 2D. As time passes, the need for more characteristic subsurface data with more detail and continuous increases. Meanwhile, high prices when acquiring 3D geoelectrical sometimes become obstacles in exploration. Therefore, we need a near-real-world cross-section of 3D modeling based on 2D data. To be able to predict the pattern of data distribution between a measuring point or between cross sections, an application of geostatistical methods is required. Geostatistics method used is kriging and Two Point Statistic. Meanwhile, for the validation of the volumetric model, integration with the Standard Penetration Test (SPT) is performed to see the spatial correlation between models. The data are then interpreted qualitatively by integrating with the geological conditions. The purpose of this research is to know pseudo-3D resistivity that can describe the surface of 3D from 2D data. The combination of the results of geophysical and geological surveys can result in the distribution of carbonate distribution in the research area of Tuban Regency, Dist. Jenu. Comparison between methods is done by validating the data with N-SPT drill on each track variation. So as to produce 3D model of TPS method more in line with spatial N-SPT compared with 3D model of kriging method. Then, based on the carbonate distribution model, it indicates that the study environment has reefal carbonate type with a combination of limestone and dolomite.

Item Type: Thesis (Undergraduate)
Uncontrolled Keywords: Geostatistika, Resistivitas 2D, Pseudo 3D
Subjects: G Geography. Anthropology. Recreation > GE Environmental Sciences
Divisions: Faculty of Civil Engineering and Planning > Geophysics Engineering > 33201-(S1) Undergraduate Thesis
Depositing User: Fahrenzy Yona Aisha
Date Deposited: 09 Jul 2021 09:54
Last Modified: 09 Jul 2021 09:54
URI: http://repository.its.ac.id/id/eprint/57285

Actions (login required)

View Item View Item