Perancangan Sistem Pengendalian Laju Aliran pada Alat Uji Kebocoran Pipa sebagai Penunjang Praktikum Sistem Instrumentasi Industri

Diotama, Shaski Icraini (2018) Perancangan Sistem Pengendalian Laju Aliran pada Alat Uji Kebocoran Pipa sebagai Penunjang Praktikum Sistem Instrumentasi Industri. Diploma thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 10511500000053-Non_Degree.pdf]
Preview
Text
10511500000053-Non_Degree.pdf - Accepted Version

Download (1MB) | Preview

Abstract

Agar penggunaannya pipa dapat dipergunakan seefisien mungkin dan menghindari terjadinya kegagalan dalam suatu proses maka perlu dilakukan pengujian pipa untuk mengetahui kekuatan pipa. Pada alat uji kebocoran pipa ini terdapat pressure tank sebagai penampung fluida bertekanan yang sebagai bahan pengujian bocor pipa. Agar ketersediaan air pada pressure tank tercukupi maka diperlukan pengendalian laju aliran. Dengan melakukan pengendalian laju aliran, maka akan dapat mengontrol kecepatan air yang masuk ke pressure tank. Pada perancangan sistem pengendalian laju aliran ini, sensor yang digunakan untuk mengukur laju aliran adalah sensor water flowmeter. Output dari sensor water flowmeter akan mengkur laju aliran yang ada dan akan memberikan respon ke Atmega128 saat setpoint laju aliran tercapai sehingga MOV sebagai aktuator akan merespon. Dari data respon pengendalian yang didapat menunjukkan bahwa pengendalian telah berjalan sesuai dengan setpoint yang diinginkan yaitu 16 LPM dan berosilasi mendekati setpoint. Selain itu berdasarkan pengujian alat pada sistem pengendalian laju aliran didapatkan respon time yang cukup baik untuk mencapai steady state dengan maksimum overshoot 18,44 LPM. Waktu yang dibutuhkan untuk mencapai setpoint (settling time) dari awal pengambilan data adalah ± 45 detik.
================================================================================================
In order to use, the pipe can be used as effficiently as possible and avoid the occurance of failure in a process it is necessary to test the pipe to determine the strength of a pipe. In this leak pipe test apparatus there is a pressure tank as a container of pressurized fluid which is the material for testing leak pipe. In order for the availability of water at a sufficient pressure tank it is necessary to control flow rate. By controlling the flow rate, it will be able to control the speed of water coming into the pressure tank. In designing this flow control system, the sensor used to measure flow is a water flow meter sensor G3/4”. The output of the water flowmeter sensor will measure the current flow and will respond to Atmega128 when the setpoint flow is reached so that the MOV as actuator flow will respond. From the control response data obtained shows the desired changes in accordance with the desired setpoint of 16 LPM and oscillate close to the setpoint. In addition, based on testing at a good enough time to achieve steady state with a maximum overshoot of 18,44 LPM. The time required to reach the setpoint (settling time) from the initial data retrieval is ± 45 seconds.

Item Type: Thesis (Diploma)
Uncontrolled Keywords: Pengujian Kebocoran Pipa, Pengendalian Laju Aliran.
Subjects: T Technology > T Technology (General)
Divisions: Faculty of Vocational > Instrumentation Engineering
Depositing User: Shaski Icraini Diotama
Date Deposited: 21 Jul 2021 23:08
Last Modified: 21 Jul 2021 23:08
URI: http://repository.its.ac.id/id/eprint/57675

Actions (login required)

View Item View Item