MODIFIKASI SISTEM KONTROL ELEKTROPNEUMATIK ADVANCED LEVEL PERCOBAAN GANJIL 1-20 BERBASIS PLC DENGAN MENGGUNAKAN FESTO PLC FEC - FC34

Mubarokah, Ahmad Minhajul (2021) MODIFIKASI SISTEM KONTROL ELEKTROPNEUMATIK ADVANCED LEVEL PERCOBAAN GANJIL 1-20 BERBASIS PLC DENGAN MENGGUNAKAN FESTO PLC FEC - FC34. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 10211710010004_Undergraduate_Thesis.pdf] Text
10211710010004_Undergraduate_Thesis.pdf - Accepted Version
Restricted to Repository staff only until 1 October 2023.

Download (9MB) | Request a copy

Abstract

Pneumatik yang dikoordinasikan dengan PLC (Programmable Logic Controller) merupakan pengembangan dari relay control system, dan memiliki kelebihan mudah di program, program dapat diatur tanpa menyetuh wiring, simpel dan perawatannya murah. Sehingga, guna meningkatkan efektifitas dan efisiensi sistem elektropneumatik dimodifikasi menjadi pneumatik berbasis PLC.
Pada tugas akhir ini sistem elektropneumatik yang terdapat di workbook FESTO dimodifikasi yang awalnya otomasinya menggunakan relay diganti dengan menggunakan PLC FEC-FC34, Sirkuit penumatik dan diagram notasi pada percobaan ini diambil dari buku “electropneumatics workbook advanced level TP 202”. Kemudian dilakukan modifikasi sirkuit elektrik sesuai dengan diagram notasi dan dilakukan pengecekan sirkuit elektrik dengan simulasi pada software Fluidsim. Jika simulasi menunjukkan sirkuit telah berjalan sesuai diagram notasi, sirkuit dapat langsung diubah menjadi ladder diagram. Namun jika tidak, sirkuit harus diperbaiki terlebih dahulu.
Hasil dari sirkuit elektrik yang telah dimodifikasi dan diubah menjadi ledder diagram percobaan 1 dan 2 yang bisa bergerak sesuai diagram notasi dan berhasil direalisasikan. Sedangkan pada percobaan yang lain perlu diperbaiki terlebih dahulu, dan tidak bisa dilakukan karena kurangnya jumlah port pada PLC yang ada di laboratorium.
========================================================================================================================
Pneumatics coordinated with PLC (Programmable Logic Controller) is a development of relay control system, and has the advantages of being easy to program, programmable without touching wiring, simple and inexpensive to maintain. Thus, in order to increase the effectiveness and efficiency of the electropneumatic system, it was modified to a PLC-based pneumatic.
In this final project, the electropneumatic system contained in the FESTO workbook was modified which initially used a relay to be automated by using a FEC-FC34 PLC, the pneumatic circuit and the notation diagram in this experiment were taken from the book "electropneumatics workbook advanced level TP 202". Then modify the electrical circuit according to the notation diagram and check the electrical circuit with a simulation on the Fluidsim software. If the simulation shows the circuit has run according to the notation diagram, the circuit can be directly converted into a ladder diagram. But if not, the circuit must be repaired first..
The results of the electrical circuit that have been modified and converted into ledder diagrams of experiments 1 and 2 that can move according to the notation diagram and are successfully realized. Meanwhile, in other experiments, it needs to be repaired first, and cannot be done because of the lack of ports on the PLC in the laboratory.

Item Type: Thesis (Undergraduate)
Uncontrolled Keywords: Elektropneumatik, Programmable Logic Controller, Sirkuit Elektrik, Ladder Diagram. Electropneumatic, Programmable Logic Controller, electric circuit, Ladder Diagram.
Subjects: T Technology > TJ Mechanical engineering and machinery > TJ219 Pneumatic control systems
T Technology > TJ Mechanical engineering and machinery > TJ950 Pneumatic machinery
Divisions: Faculty of Vocational > Mechanical Industrial Engineering
Depositing User: Ahmad Minhajul Mubarokah
Date Deposited: 12 Aug 2021 08:51
Last Modified: 12 Aug 2021 08:51
URI: http://repository.its.ac.id/id/eprint/85789

Actions (login required)

View Item View Item