Analisa Finite Element Method (FEM) untuk Friction Stir Welding

Adiwiyata, Ibnu (2018) Analisa Finite Element Method (FEM) untuk Friction Stir Welding. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 2110100058-Undergraduate Thesis.pdf]
Preview
Text
2110100058-Undergraduate Thesis.pdf - Accepted Version

Download (4MB) | Preview

Abstract

Aluminium adalah logam yang memiliki sifat resistensi yang baik, yaitu tahan terhadap korosi, Selain sifatnya yang tahan korosi, aluminium juga memiliki berat yang lebih ringan dibandingkan dengan baja, sehingga aluminium sering digunakan sebagai salah satu bahan yang digunakan dalam proses pegelasan Proses pengelasan aluminium paduan salah satunya dapat dilakukan dengan cara pengelasan friction stir welding.
Friction Stir Welding (FSW) merupakan proses pengelasan baru yang dipromosikan dengan sedikit biaya dan kualitas sambungan yang baik. Hal itu dikarenakan pengelasan tidak membutuhkan logam pengisi dan bisa menghilangkan sedikit cacat retak dan porositas. Prinsip FSW menggunakan tools yang berotasi dan bergerak melintas sehingga material terjadi penempaan pada pusat lasan menjadi lebur. Kemungkinan terjadinya distribusi temperatur dan kecepatan pengelasan pada friction stir welding cukup besar. Keadaan ini terjadi dikarenakan pada saat proses pengadukan unit tool friction stir welding menerima gaya gesek dan tekan yang besar.
Secara umum, tujuan dari simulasi friction stir welding ini adalah untuk menngetahui distribusi temperatur dan kecepatan pengelasan,serta finite element pada proses pengelasan setelah membagi objek menjadi bagian-bagian kecil,dengan menggunakan simulasi ansys. Hal – hal yang mampu dicakup oleh simulasi las gesek ini antara lain untuk memodelkan panas yang timbul dan fenomena apa saja yang terjadi pada daerah pengelasan serta efek yang menyertai proses las.
============================================================================================================
Aluminum is a metal that has good resistance properties. Ie resistant to corrosion, In addition to its corrosion, aluminum also has a lighter weight with steel, so aluminum is often used as one of the materials used in the process of clarity Alloy aluminum welding process can be done wrong by way of welding friction welding stir.
Friction Stir Welding (FSW) is a newly designed welding process with little cost and good connection quality. It happens that welding does not need cheap metal and can be slightly defective crack and porosity. The FSW principle uses a tool that rotates and moves across so that the material takes place at the center of the weld to melt. Friction stir welding is large enough. The current state occurs when the stirring process of the welding stroke brush compression unit receives a large frictional and tap force.
In general, the purpose of this welding swing simulation is to know the distribution of temperature and welding speed, as well as the finite element in the welding process after being split into small parts, using ansys simulations. Matters that can be covered by the simulation of friction welding are, among others, to model the heat that arises and any phenomena that occur in the welding area and the effects that accompany the welding process.

Item Type: Thesis (Undergraduate)
Additional Information: RSM 671.52 Adi a-1 3100018075062
Uncontrolled Keywords: Distribusi temperatur; Kecepatan pengelasan; Aluminum; Friction stir welding; temperature distribution; welding speed
Subjects: T Technology > TA Engineering (General). Civil engineering (General) > TA347 Finite Element Method
T Technology > TJ Mechanical engineering and machinery > TJ230 Machine design
T Technology > TN Mining engineering. Metallurgy > TN752.I5 Steel--Heat treatment
T Technology > TS Manufactures > TS170 New products. Product Development
Divisions: Faculty of Industrial Technology > Mechanical Engineering > 21201-(S1) Undergraduate Thesis
Depositing User: ADIWIYATA IBNU
Date Deposited: 25 Jan 2018 07:28
Last Modified: 18 Sep 2020 04:57
URI: http://repository.its.ac.id/id/eprint/50474

Actions (login required)

View Item View Item