Desain Dan Simulasi Boost Converter Empat Tingkat Dengan Kontrol MPPT Untuk Aplikasi Solar Water Pumping

Susetyo, Radi Dwi (2015) Desain Dan Simulasi Boost Converter Empat Tingkat Dengan Kontrol MPPT Untuk Aplikasi Solar Water Pumping. Undergraduate thesis, Institut Technology Sepuluh Nopember.

[thumbnail of 2210100096-Undergraduate Thesis.pdf]
Preview
Text
2210100096-Undergraduate Thesis.pdf - Published Version

Download (1MB) | Preview

Abstract

Pada dasarnya air bersih merupakan sumber daya alam yang
sangat penting guna memenuhi kebutuhan hidup manusia, kesehatan
manusia, dan menjamin produksi bahan pangan. Sehingga pompa air
sangat diperlukan untuk memenuhi kebutuhan sumber daya air bersih.
Namun masyarakat di daerah terpencil yang jauh dari jaringan listrik
menggunakan genset berbahan bakar minyak untuk mengoperasikan
pompa air. Oleh karena itu, sistem pompa air dengan sumber energi
terbarukan photovoltaic sangat tepat digunakan di daerah terpencil.
Dalam tugas akhir ini dibahas Solar Water Pumping System yang
menggunakan kontrol MPPT P&O untuk menentukan daya maksimum
dari photovoltaic (PV). Sistem ini menggunakan boost converter empat
tingkat untuk meningkatkan tegangan keluaran PV dari 150 Volt
menjadi 600 Volt dengan duty cycle 0.25. Adanya DC-Link Control
membuat tegangan DC-Link tetap konstan, sehingga tegangan masukkan
inverter tiga fasa akan stabil. Motor induksi tiga fasa sebagai penggerak
pompa sentrifugal mampu bekerja optimal dengan kontrol V/F konstan.
=====================================================================================================
Basically, water is natural resource that is important to fulfill the
needs of human life, human health, and ensuring food production. So,
water pump is needed to fulfill of clean water. However, people in
remote areas far from the power grid using oil-fuel generators to operate
pumps. Therefore, water pump system with photovoltaic renewable
energy sources is very appropriate to be used in remote areas.
In this final project discussed about Solar Water Pumping System
which uses P&O MPPT control to determine the maximum power of
photovoltaic (PV). This system uses a four-level boost converter to
increase the PV output voltage of 150 Volt to 600 Volt with a duty cycle
of 0,25. DC-Link control makes the DC-Link voltage remains constant,
and then the three phase voltage inverter will be stable. Three phase
induction motor as prime mover of centrifugal pump can work optimally
with v/f control.

Item Type: Thesis (Undergraduate)
Additional Information: RSE 621.313 Sus d
Uncontrolled Keywords: Boost Converter, DC-Link, MPPT, PV, V/F konstan
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK7872 Electric current converters, Electric inverters.
Divisions: Faculty of Industrial Technology > Electrical Engineering > 20201-(S1) Undergraduate Thesis
Depositing User: Mr. Tondo Indra Nyata
Date Deposited: 04 Jul 2018 08:27
Last Modified: 04 Jul 2018 08:27
URI: http://repository.its.ac.id/id/eprint/52095

Actions (login required)

View Item View Item