Analisa Gaya Angkat lift dan Drag Surfboard pada Wavehouse Flowrider menggunakan metode CFD

Utomo, Wisnhu Putro (2018) Analisa Gaya Angkat lift dan Drag Surfboard pada Wavehouse Flowrider menggunakan metode CFD. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of Laporan TA wisnhu 04211140000090.pdf]
Preview
Text
Laporan TA wisnhu 04211140000090.pdf - Accepted Version

Download (1MB) | Preview

Abstract

Wavehouse flowrider merupakan sebuah tempat yang rancang khusus dengan memberikan gelombang buatan yang dapat dimanfaatkan untuk berselancar. Gerakan pada wavehouse flowrider bergerak secara laminar, dengan tinggi kedalaman air yang tidak terlalu dalam. Hal yang mendasari pada Tugas Akhir ini untuk mendapatkan gaya angkat terhadap berat beban peselancar pada papan surfboard di wavehouse flowrider. Desain dari papan surfboard memiliki panjang 1,5m dan lebar 0,5 m dengan variasi sudut angle of attack sebesar 100 dan 200. Penggujian model dilakukan dengan memberikan berat beban peselancar sebesar 490 newton,588 newton dan 686 newton. Dari hasil simulasi didapatkan hasil berupa gaya lift dan drag yang digunakan sebagai patokan keberhasilan untuk simulasi model. Dari hasil percobaan model, pada model A dengan sudut angle of attack 100 belum memenuhi besarnya gaya angkat yang diberikan oleh berat beban peselancar sehingga pada model A baik itu saat tanpa manuver maupun saat manuver hasil percobaan model A belum berhasil. Sedangkan untuk model B dengan sudut angle of attack 200 hasil dari gaya angkat yang dihasilkan sama dengan berat beban peselancar sehingga pada model B dapat dikatakan berhasil. Dan dari hasil percobaan, daya pompa yang dibutuhkan untuk kapasitas wavehouse flowrider 17,904 liter/s dengan head pompa sebesar 14,08 m yaitu 15 Kw.
===============================================================Wavehouse flowrider is a specially designed place by providing artificial waves that can be utilized for surfing. The movement of the flowrider wavehouse moves laminarly, with a high water depth not too deep. The underlying thing on this final Project is to get a lift force to the weight of surfers load on the surfboard in the wavehouse flowrider. The design of the surfboard has a length of 1,5m and a width of 0,5 m with angle of attack angle variations of 100 and 200. Model testing is done by giving the weight of surfers of 490 newtons, 588 newtons and 686 newtons. From the simulation results obtained the results of the lift and drag force used as a benchmark of success for model simulation. From the experimental model, in model A with angle of attack angle 100 has not fulfilled the lift force given by the weight of surfers so that the load on model A both when it was not maneuvered and when maneuvering experimental results of model A has not been successful. As for model B with angle of attack angle of 200 result of lift force that is equal to weight of burden surfer so that model B can be said successful. And from the experimental results, the required pumping power for flowhouse wavehouse capacity is 17,904 liters / s with pump head equal to 14,08 m that is 15 Kw.

Item Type: Thesis (Undergraduate)
Uncontrolled Keywords: beban,lift,drag,wavehouse flowrider,CFD
Subjects: V Naval Science > VM Naval architecture. Shipbuilding. Marine engineering > VM731 Marine Engines
Divisions: Faculty of Marine Technology (MARTECH) > Marine Engineering > 36202-(S1) Undergraduate Thesis
Depositing User: Wisnhu Putro Utomo
Date Deposited: 01 Jul 2021 07:11
Last Modified: 01 Jul 2021 07:11
URI: http://repository.its.ac.id/id/eprint/56816

Actions (login required)

View Item View Item