Rancang Bangun Sistem Otomasi Kontrol Temperatur, Kelembapan, dan Level Air Pada Penyemaian Tanaman Hidroponik Berbasis Mikrokontroler

Ramadhani, Ahmad Ilham (2018) Rancang Bangun Sistem Otomasi Kontrol Temperatur, Kelembapan, dan Level Air Pada Penyemaian Tanaman Hidroponik Berbasis Mikrokontroler. Diploma thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 10311500000037-Non_Degree.pdf]
Preview
Text
10311500000037-Non_Degree.pdf - Accepted Version

Download (2MB) | Preview

Abstract

Tahap penyemaian benih merupakan salah satu tahap yang penting pada pertumbuhan tanaman hidroponik karena tahap ini menyangkut kelangsungan pertumbuhan tanaman pada fase selanjut-nya. Beberapa faktor yang dapat memeranguhi pertumbuhan tana-man diantaranya temperatur, kelembaban, intensitas cahaya, dan ka-dar air. Selama ini pemilik kebun sayur hidroponik melakukan pen-gontrolan keempat parameter tersebut secara manual. Hal ini dirasa kurang efektif dan efisien, karena banyak benih semaian yang gagal tumbuh karena faktor lingkungan sekitar yang dapat ditelusuri melalui keempat parameter tersebut.
Berdasarkan kondisi ini, maka dibuat suatu alat yang dapat melakukan pengontrolan pada tahap penyemaian tanaman hidro-ponik. Metode yang digunakan pada sistem alat ini yaitu dengan melakukan pengontrolan ke-empat parameter menggunakan sensor DS18B20 untuk temperatur, sensor HSM-20G untuk kelembapan, sensor Water Level Funduino untuk level air dan sensor LDR untuk cahaya. Mikrokontroler yang digunakan adalah ATMega16 yang telah diterapkan program inisialisasi dan konfigurasi perangkat keras serta pembacaan sinyal masukan dari sensor tersebut, yang juga tersambung dengan aktuator Ultrasonic Humidifier sebagai alat yang membantu peningkatan kelembaan, pompa air yang membantu pengisian air pada bak secaa otomatis, dan tirai cahaya yang digerakkan oleh motor servo untuk mengontrol penerimaan cahaya.
Hasil dari penelitian tugas akhir ini adalah terciptanya rancang bangun alat bantu untuk petani hidroponik dalam tahap penyemaian benih tanaman hidroponik, yang memiliki sistem otomasi kontrol temperatur, kelembapan, level air, dan juga cahaya pada lingkungan tempat penyemaian benih Hidroponik, dan dapat dikembangkan di kemudian hari.
============================================================
One of the most important stages in the growth of hydroponics plants is the seed seeding stage because it concerns the continuity of plant growth for the next phase. There’re some factors that may affect the growth of plants such as temperature, humidity, water, and light intensity. Most owner of hydroponic vegetable garden still controls the parameters mentioned before conventionally. And it’s considered less effective and efficient, because the owner should do the control directly in the vegetable garden.
Based on this condition, a device is build to control the hydroponic plant seeding stage. The method used in this device’s system is by doing the control of the 4 parameters using the DS18B20 sensor for the temperature, HSM-20G sensor for the humidity, the Water Level Fundino sensor for water level, and LDR for the lightning . The micro-controller used for the device is ATMega16 which has implemented ini-tialization program and hardware configuration and input signal read-ings, which also connected to the actuator such as Ultrasonic Humidifi-er to help the temperature and humidity, water pump to fill up the water tank for the seed, and a lightning curtain working with a servo motor to maintain the seeds lightning.
The result of this research is a prototype device made to help the hydroponic farmer during the seed seeding phase of their hydroponic plants, which have an automation system that able to control and maun-tain the parameters of the hydroponic vegetables including temperature and humidity, water level, and light intensity, so it mau ease the owner of hydroponic vegetables on its treatment, and could be developed in the upcoming time.

Item Type: Thesis (Diploma)
Additional Information: RSEO 621.391 6 Ram r
Uncontrolled Keywords: Hidroponik, Humidifier, Sensor DS18B20, Sensor HSM-20G, Water Level Funduino
Subjects: S Agriculture > S Agriculture (General) > S633.5 Fertilizers
S Agriculture > SB Plant culture
T Technology > TD Environmental technology. Sanitary engineering
Divisions: Faculty of Industrial Technology > Electrical Engineering > 20401-(D3) Diploma 3
Depositing User: Ahmad Ilham Ramadhani
Date Deposited: 02 Jan 2019 06:08
Last Modified: 27 Jan 2021 04:13
URI: http://repository.its.ac.id/id/eprint/58946

Actions (login required)

View Item View Item