Pengaruh Penambahan Al2O3 dan Fe2O3 pada SiO2 Ekstraksi Lumpur Sidoarjo sebagai Dielektrik dan Penghambur Cahaya pada Dye Sensitized Solar Cells (DSSC)

Nurrahmawati, Puji (2019) Pengaruh Penambahan Al2O3 dan Fe2O3 pada SiO2 Ekstraksi Lumpur Sidoarjo sebagai Dielektrik dan Penghambur Cahaya pada Dye Sensitized Solar Cells (DSSC). Masters thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 02311650022031-Master_Thesis.pdf]
Preview
Text
02311650022031-Master_Thesis.pdf

Download (2MB) | Preview

Abstract

Penelitian yang telah dilakukan menunjukkan adanya γ-Al2O3 dan α-Fe2O3 dari hasil ekstraksi lumpur Sidoarjo dengan prospek dapat meningkatkan efisiensi dari Dye Sensitized Solar Cells (DSSC) (Puspitasari et al, 2015). Pada penelitian ini bertujuan untuk menganalisa pengaruh dan perbedaan penambahan γ-Al2O3/SiO2 dan α-Fe2O3/SiO2 sebagai dielektrik dan penghambur cahaya pada DSSC serta membandingkan dengan SiO2 Glass Sphere (GS). Pada penelitian ini elektroda kerja yang digunakan adalah flourine tin oxide (FTO) yang dilapisi oleh TiO2 anatase/SiO2 dengan ratio 99,5%/0,5% dengan memvariasikan penambahan γ-Al2O3 dan α-Fe2O3 pada SiO2 dengan ratio berat 5%, 10%, dan 20%. Hasil yang diperoleh kemudian dikarakterisasi menggunakan difraksi sinar-X (XRD), Fourier Transform InfraRed (FT-IR), Sepktroskopi Ultraviolet-Visible (UV-Vis), Physical Size Analyzer (PSA), Scanning Electron Microscope (SEM) dan energi dispersi sinar-X (EDX). Dye yang digunakan adalah N719, larutan elektrolit iodida/triodida, dan elektroda lawan yang digunakan Pt. DSSC yang telah disusun kemudian difabrikasi dan dilakukan pengujian I-V dan Incident Photo Current-Electron (IPCE). Pengaruh penambahan γ-Al2O3/SiO2 dan α-Fe2O3/SiO2 sebagai dielektrik dan penghambur cahaya pada DSSC masing-masing dapat meningkatkan efisiensi sebesar 33% γ-Al2O3/SiO2 dan 28% α-Fe2O3/SiO2 dari SiO2 lumpur Sidoarjo dan 9% γ-Al2O3/SiO2 dan 21% α-Fe2O3/SiO2 dari SiO2 GS. Efisiensi yang optimum pada SiO2 ekstraksi lumpur Sidoarjo dan SiO2 GS terdapat pada ratio penambahan 10% untuk γ-Al2O3 dan 20% untuk α-Fe2O3. Perbedaan karakteristik dari SiO2 lumpur Sidoarjo terdapat pada absorbansi yang lebih baik dan ukuran partikel yang lebih kecil dibandingkan SiO2 GS.
================================================================================================
The research that has been done shows the existence of γ-Al2O3 and α-Fe2O3 from the extraction of Sidoarjo mud capable of increasing Dye Sensitized Solar Cells (DSSC) efficiency (Puspitasari et al, 2015). So, this study aims to analyze the effect and the differences in the addition of γ-Al2O3/SiO2 and α-Fe2O3/SiO2 as a dielectric and light scattering in DSSC as well as making a comparison with SiO2 Glass Sphere (GS). In this research, the used electrodes are FTO which is coated by TiO2 anatase/SiO2 with a ratio 99.5%/0.5% by varying the addition of γ-Al2O3 and α-Fe2O3 on SiO2 with a weight ratio of 5%, 10%, and 20%. The obtained results are later characterized using X-Ray Difraction (XRD), Sepktroscopy Ultraviolet-Visible (UV-Vis), Physical Size Analyzer (PSA), Scanning Electron Microscope (SEM) and Energy Dispersive X-Ray (EDX). The Dye used is N719, iodide/triiodide electrolyte solution, whereas the opposite electrode by Pt. DSCC have been compiled, then fabricated and carried out using I-V testing and Incident Photo Current-Electron (IPCE). The Effect of addition of γ-Al2O3/SiO2 and α-Fe2O3/SiO2 as a dielectric and light scatter in DSSC can increase the efficiency by 33% γ-Al2O3/SiO2 and 28% α-Fe2O3/SiO2 from SiO2 Sidoarjo mud and 9% γ-Al2O3/SiO2 and 21% α-Fe2O3/ SiO2 from SiO2 GS. Optimum efficiency in SiO2 extracted from Sidoarjo mud and SiO2 GS is available at the ratio of adding 10% to γ-Al2O3 and 20% for α-Fe2O3. The difference is observed in the absorbance and size of SiO2 particles whereas that extracted from Sidoarjo mud are better and smaller than SiO2 GS.

Item Type: Thesis (Masters)
Additional Information: RTF 621.312 44 Nur p-1 2019
Uncontrolled Keywords: DSSC, TiO2,Lumpur Sidoarjo, Al2O3, Fe2O3
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK2960 Dye-sensitized solar cells. Solar batteries. Solar cells
Divisions: Faculty of Industrial Technology and Systems Engineering (INDSYS) > Physics Engineering > 30101-(S2) Master Thesis
Depositing User: Puji Nurrahmawati
Date Deposited: 24 Jun 2021 04:06
Last Modified: 24 Jun 2021 04:06
URI: http://repository.its.ac.id/id/eprint/60684

Actions (login required)

View Item View Item