Optimalisasi Performa PLTU Kapasitas 420 Mw Menggunakan Variasi Pada Tekanan Dan Massa Ekstraksi Turbin LP

Go, Yon Stria (2015) Optimalisasi Performa PLTU Kapasitas 420 Mw Menggunakan Variasi Pada Tekanan Dan Massa Ekstraksi Turbin LP. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 2109100140-Undergraduate_Thesis.pdf]
Preview
Text
2109100140-Undergraduate_Thesis.pdf - Accepted Version

Download (3MB) | Preview

Abstract

Kebutuhan listrik dunia terutama di Indonesia setiap tahunnya semakin meningkat seiring dengan pertumbuhan ekonomi dan pertambahan jumlah penduduk serta adanya peningkatan gaya hidup masyarakat. Untuk itu diperlukan berbagai langkah antisipasi dari pemerintah pusat maupun daerah selaku pemegang kekuasaan agar produksi listrik masih dapat mengimbangi konsumsi listrik dalam negeri. PLN setidaknya menerapkan dua langkah utama untuk dapat meningkatkan produksi listrik domestik, yaitu dengan membangun unit-unit pembangkit baru, dan juga dengan meningkatkan effisiensi kerja. Untuk meningkatkan effisiensi, sebuah pembangkit dapat menambahkan komponen seperti economizer, reheater serta feedwater heater.
Untuk menganalisa sebuah PLTU dapat menggunakan analisa thermodinamika, untuk mencari kalor masuk pada boiler (Qin), kerja yang dihasilkan turbin (Wt), kerja yang dibutuhkan pompa (Wp), dan nilai effisiensi pembangkit secara keseluruhan baik secara manual maupun dengan bantuan software Gatecycle. Metode optimasi yang dilakukan yaitu dengan mengubah komposisi nilai % massa dan tekanan pada turbin LP yang menuju LPH1, LPH2 dan LPH3.
Dari penelitian ini didapatkan sebuah model simulasi pada GateCycle secara mandiri berdasar data heat balance. Dan didapat nilai tekanan ekstraksi terbaik, yaitu pada tekanan P1 – 0.5 kg/cm2, serta komposisi yang optimal untuk tekanan pada ekstraksi turbin yaitu 6% menuju LPH 1, 5% menuju LPH 2 dan 5% menuju LPH 3 sehingga terjadi peningkatan pada daya pembangkit sebesar 1.13 MW menjadi 421.25 MW serta peningkatan effisiensi pembangkit sebesar 0.1% menjadi 37.39%.
================================================================================================
The worlds electricity needs, especially in Indonesia each year is increasing along with economic growth and population growth and an increase in peoples lifestyles. It is necessary for the various steps in anticipation of central and local government as the authority in order to still be able to offset the electricity production of domestic electricity consumption. PLN least implement two major steps to increase domestic electricity production, namely by building new generating units, and also by improving the working efficiency. To improve efficiency, a power plant can add components such as economizer, reheater and feedwater heater.
To analyze a plant can use thermodynamic analysis, to find the entrance to the boiler heat (Qin), work produced turbine (Wt), work required pump (Wp), and the value of the overall plant efficiency either manually or with the help of software Gatecycle. Optimization methods that do that is by changing the composition of the value of by mass and the pressure on the Low Pressure turbine towards LPH1, LPH2 and LPH3.
From this study a simulation model based on the data independently GateCycle heat balance from Steam Power Plant with capacity 420 MW. And obtained the best value extraction pressure, namely the pressure P1 - 0.5 kg / cm2, and the right composition for the extraction pressure turbine that is 6% toward the LPH 1, 5% towards LPH 2 and 5% toward the LPH 3 resulting in an increase in plant power by 1.13 MW to 421.25MW and efficiency by 0.1% to 37.39%.

Item Type: Thesis (Undergraduate)
Additional Information: RSM 621.312 132 Goy o
Uncontrolled Keywords: PLTU, Effisiensi, GateCycle, Feedwater Heater
Subjects: T Technology > TJ Mechanical engineering and machinery > TJ778 Gas turbines
T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK7 Turbogenerators. Steam-turbines
Divisions: Faculty of Industrial Technology > Mechanical Engineering > 21201-(S1) Undergraduate Thesis
Depositing User: Yeni Anita Gonti
Date Deposited: 28 Feb 2020 08:51
Last Modified: 28 Feb 2020 08:51
URI: http://repository.its.ac.id/id/eprint/75237

Actions (login required)

View Item View Item