Pra Desain Pabrik Polyaluminium Chloride dari Aluminium Scrap

Anggoro, Fais Verian and Abdillah, Yasir (2020) Pra Desain Pabrik Polyaluminium Chloride dari Aluminium Scrap. Other thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 02211640000066_02211640000096-Undergraduate_Thesis.pdf]
Preview
Text
02211640000066_02211640000096-Undergraduate_Thesis.pdf - Accepted Version

Download (1MB) | Preview

Abstract

Pabrik polialuminium klorida (PAC) ini didirikan dengan tujuan untuk membantu menumbuhkan potensi ekonomi masyarakat di Cikarang, Bekasi yang berekonomi kapita sebagai pengepul sampah. Bahan baku polialuminium klorida ini adalah aluminium scrap. Penggunakan PAC sebagian besar digunakan dalam industri pengolahan limbah, selain itu PAC juga digunakan dalam industri air bersih.
Pabrik PAC yang direncanakan berdiri pada tahun 2022 di Cikarang, Bekasi. Kapasitas pabrik sebesar 4881 ton/tahun, memenuhi kemampuan suplai beberapa industri di Pulau Jawa. Proses pembuatan PAC dimulai dari reducing size dari aluminium scrap. Reducing size bertujuan untuk memudahkan proses reaksi dan memperluas area reaksi. Kemudian aluminium dilewatkan di screener untuk memisahkan aluminium yang sesuai dengan ukuran yang diinginkan. Kemudian aluminium dilewatkan ke reaktor untuk direaksikan dengan asam klorida (HCl) encer. Setelah itu akan terbentuk PAC dan gas hidrogen. PAC yang terbentuk kemudian disaring dengan filter press untuk memisahkan PAC dengan aluminium yang tidak bereaksi dan pengotor. Pengotor akan dibuang sementara aluminium yang tidak bereaksi akan dikembalikan ke reaktor. PAC yang telah melewati filter press akan disimpan dalam storage sebelum didistribusikan. Gas hidrogen yang terbentuk akan dialirkan menuju flare dan dibakar. Sisa HCl yang tidak bereaksi akan dikembalikan ke dalam reaktor melalui kondensor.
Pabrik PAC ini direncanakan beroperasi secara kontinyu selama 24 jam dengan waktu produksi 330 hari/tahun. Operasi pabrik PAC ini memiliki perencanaan sebagai berikut
1. Kapasitas produksi : 4881 ton/tahun
2. Jumlah tenaga kerja : 86 orang
3. Analisa ekonomi :
• Komposisi modal : sendiri 40%, pinjaman 60%
• Bunga bank : 7,25% per tahun
• Total modal investasi : Rp. 98.082.262.624
• Total biaya produksi : Rp. 514.505.535.781
• Penjualan per tahun :Rp.538.772.085.403
• Internal Rate of Return : 65 %
• Pay out time : 4,86 tahun
• Break even point : 34,9 %
Dari hasil uraian diatas, ditinjau dari segi teknis maupun ekonomis, pabrik PAC ini layak untuk ditinjau lebih lanjut ke tahap perencanaan.
====================================================================================================================
The polyaluminium chloride (PAC) factory was established with the aim of helping to grow the economic potential of the people in Cikarang, Bekasi with a capita economy as waste collectors. The raw material for this polyaluminium chloride is aluminum scrap. Most of the use of PAC is used in the sewage treatment industry, besides that PAC is also used in the clean water industry.
The PAC factory is planned to be established in 2022 in Cikarang, Bekasi. The factory capacity is 4881 tons / year, meeting the supply capabilities of several industries in Java Island. The process of making PAC starts with reducing sizes of aluminum scrap. Reducing size aims to facilitate the reaction process and expand the reaction area. Then the aluminum is passed in the screener to separate the aluminum according to the desired size. Then the aluminum is passed to the reactor to be reacted with dilute hydrochloric acid (HCl). After that will form PAC and hydrogen gas. The formed PAC is then filtered with a filter press to separate the PAC from unreacted aluminum and impurities. The impurities will be removed while the unreacted aluminum will be returned to the reactor. PAC that has passed through the filter press will be stored in storage before distribution. The hydrogen gas formed will flow into the flare and burn it. The remaining unreacted HCl will be returned to the reactor through the condenser.
This PAC plant is planned to operate continuously for 24 hours with a production time of 330 days / year. This PAC plant operation has the following plans
1. Production capacity: 4881 tons / year
2. Number of workers: 86 people
3. Economic analysis:
• Capital composition: own 40%, loan 60%
• Bank interest: 7.25% per annum
• Total investment capital: Rp. 98,082,262,624
• Total production costs: Rp. 514,505,535,781
• Sales per year: Rp. 538,772,085,403
• Internal Rate of Return: 65%
• Pay out time: 4.86 years
• Break even point: 34.9%
From the results of the description above, from a technical and economic point of view, this PAC plant is worthy of further review at the planning stage.

Item Type: Thesis (Other)
Uncontrolled Keywords: Pra Desain Pabrik, Polyaluminium Chloride, Aluminium Scrap Plant Design, Polyaluminium Chloride, Aluminium Scrap
Subjects: T Technology > TP Chemical technology
Divisions: Faculty of Industrial Technology and Systems Engineering (INDSYS) > Chemical Engineering > 24201-(S1) Undergraduate Thesis
Depositing User: Yasir Abdillah
Date Deposited: 25 Aug 2020 23:39
Last Modified: 05 Jun 2023 13:49
URI: http://repository.its.ac.id/id/eprint/80157

Actions (login required)

View Item View Item