Perangkat Lunak Perhitungan BPPT-Lock Berbasis Visual Basic Excel

Selviana, Anallenian (2022) Perangkat Lunak Perhitungan BPPT-Lock Berbasis Visual Basic Excel. Other thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 04311840000003-Undergraduate_Thesis.pdf] Text
04311840000003-Undergraduate_Thesis.pdf - Accepted Version
Restricted to Repository staff only until 1 April 2024.

Download (7MB) | Request a copy

Abstract

Armour unit merupakan suatu batu buatan (biasanya terbuat dari beton) yang digunakan untuk melindungi pantai dari bahaya gelombang air laut. Salah satu armour units buatan bangsa Indonesia yang memiliki kelebihan dalam hal stabilitas adalah BBPT-Lock. Perhitungan stabilitas lapis dapat dilakukan dengan menggunakan Formulasi Hudson. Pada penelitian ini akan dibuat perangkat lunak berbasis VBA dengan Formula Hudson untuk menghitung berat BPPT-Lock sehingga akan memudahkan untuk melakukan perhitungan awal perencanaan. Dalam penelitiaan ini lokasi yang digunakan untuk studi kasus adalah Kalimantan Selatan. Variasi slope yang digunakan dalam perangkat lunak adalah 1:2, 2:3, dan 3:4. Benchmarking dilakukan untuk section trunk pada Xbloc dengan slope 3:4 dan KD 16. Hasil uji T yang didapatkan adalah Thitung sebesar 2.11, Tsignifikan 2.12, dimana Thitung lebih kecil daripada Tsignifikan yang menunjukkan tidak ada perbedaan berat antara perangkat lunak dengan Online Xbloc Calculator sehingga perhitungan berat BPPT-Lock dengan perangkat lunak berbasis VBA dapat dinyatakan valid. Perhitungan berat BPPT-Lock di Kalimantan Selatan digunakan 3 arah datang gelombang dominan yaitu WSW, SE, dan SSE. Kala ulang yang digunakan adalah 30 tahun. Hasil yang didapatkan adalah semakin besar nilai cot θ, maka berat BPPT-Lock juga akan semakin menurun. Dari analisis tersebut juga dapat diketahui bahwa berat BPPT-Lock untuk Head lebih besar daripada pada Trunk.
================================================================================================
The armour unit is an artificial stone (usually made of concrete) that is used to protect against the dangers of sea waves. One of the armour units made by the Indonesian nation that has advantages in this regard is BBPT-Lock. Layer speed can be done using the Hudson Formulation. In this research, VBA-based software with Hudson's Formula will be made to calculate the weight of BPPT-Lock so that it will be easier to carry out initial planning calculations. In this research, the location used for the case study is South Kalimantan. The tilt variations used in the software are 1:2, 2:3, and 3:4. Benchmarking is done for the trunk on Xbloc with a slope of 3:4 and KD 16. The results of the T-test obtained are T-count of 2.11, Tsignificant of 2.12, where T-count is smaller than Tsignificant which indicates there is no difference between the software and the Online Xbloc Calculator so that the calculation of BPPT-Lock weight with VBA-based software can be declared valid. Calculation of the weight of BPPT-Lock in South Kalimantan used 3 dominant wave directions, namely WSW, SE, and SSE. The period of return used is 30 years. The results obtained are the greater the value of cot, the weight of BPPT-Lock will also decrease. From this analysis, it can also be seen that the weight of the BPPT-Lock for the Head is greater than that of the Trunk.

Item Type: Thesis (Other)
Uncontrolled Keywords: BPPT-Lock, Perangkat Lunak, VBA, Xbloc, Software
Subjects: T Technology > TC Hydraulic engineering. Ocean engineering
T Technology > TC Hydraulic engineering. Ocean engineering > TC203.5 Coastal engineering
T Technology > TC Hydraulic engineering. Ocean engineering > TC333 Breakwaters
Divisions: Faculty of Marine Technology (MARTECH) > Ocean Engineering > 38201-(S1) Undergraduate Thesis
Depositing User: Anallenian Selviana
Date Deposited: 31 Jan 2022 06:09
Last Modified: 02 Nov 2022 03:25
URI: http://repository.its.ac.id/id/eprint/92583

Actions (login required)

View Item View Item