Rancang Bangun Sistem Monitoring Pertumbuhan Ikan Lele Dan Sistem Kontrol Automatic Feeding Berdasarkan Berat Ikan

A.Hadziq, Masfuh (2021) Rancang Bangun Sistem Monitoring Pertumbuhan Ikan Lele Dan Sistem Kontrol Automatic Feeding Berdasarkan Berat Ikan. Undergraduate thesis, ITS.

[thumbnail of 07111740000080-Undergraduate_Thesis.pdf] Text
07111740000080-Undergraduate_Thesis.pdf - Accepted Version
Restricted to Repository staff only until 1 April 2024.

Download (2MB) | Request a copy

Abstract

Budidaya ikan Indoor (dalam ruang) merupakan salah satu cabang
usaha yang berpotensi memajukan perekonomian negara. Terdapat banyak
faktor yang perlu diperhatikan dalam budidaya ikan, khususnya pada ikan lele,
untuk mendapatkan hasil panen yang memuaskan, pemberian pakan harus
dilakukan secara rutin agar lele yang dibudidaya bisa tumbuh dengan baik,
berdasarkan sumber terpercaya, dalam pemberian pakan ikan lele juga harus
dipertimbangkan berat dari ikan tersebut juga jenis pakan yang digunakan, pada
saat lele umur tertentu dan berat tertentu maka pakan yang diberikan adalah
persentase tertentu dari berat ikan, agar pemberian pakan dilakukan secara
optimal maka penulis merancang sebuah sistem untuk pemberian pakan secara
otomatis berdasarkan kondisi ikan dan beratnya, secara umum terdapat dua
sistem dalam alat ini yakni sistem monitoring dan sistem pemberian pakan, pada
sistem monitoring, sensor berat digunakan untuk menimbang berat ikan,
mekanisme penimbangan ikan yakni dengan menggunakan katrol dan jaring,
jaring dirancang untuk mencakup keseluruhan kolam agar saat katrol yang
tersambung dengan jaring aktif maka seluruh ikan akan terangkat, sensor berat
juga terpasang pada tali katrol untuk mengukur berat ikan, untuk sistem
pemberian pakan, selenoid valve akan sangat berpengaruh untuk mengatur kadar
pakan yang diberikan, valve dipasang secara langsung ke tangki pakan,
NodeMCU sebagai mikrokontroler dipasang pada valve, sensor berat dan juga
katrol, dan penghubung antara tiga NodeMCU tersebut adalah Raspberry Pi
sebagai pusat pengolahan data dan jalannya lalulintas komunikasi, MQTT
dipilih sebagai protokol komunikasi sehingga NodeMCU harus harus terhubung
dulu dengan jaringan LAN yang sama pada Raspberry Pi. Prototype ini
menggunakan kolam dengan ukuran 0.5 meter kubik sehingga hanya bisa
mencakup 1-20 ikan, dan hanya membutuhkan sumber listrik AC 220v dan daya
sekitar 6-28watt (4 untuk raspberry pi dan 2-24 watt pada regulator 24v).
terdapat kegagalan dalam membuat katrol tetapi bisa menggunakan alternatif
secara manual, diperlukan percobaan selama 10 kali untuk menghasilkan nilai
sensor dan takaran yang pas yakni dengan error 11%.
=========================================================================================================
Indoor based fish cultivation is one of many businesses branch
that have potential to advance country’s economy. there is many factor
that need to be determined in fish cultivation, especially when cultivate
catfish, you need to feed the fish properly so the fish will grow well,
according to journal and article about catfish farm, the amount of fish
fodder you need to feed them is determined based on fish weight, age
also the type of fodder, to make feeding process running optimal every
day, we need to build a system that allow us to properly feed the fish
automatically based on the fish condition. there is two system mainly,
first is monitoring system then automatic feeding system, weight sensor
is main part of monitoring system to measure fish weight, the measuring
mechanism is using fish net and pulley, the fish net is designed to cover
the pond area, so when the pulley who attached to net is active, all fish
will be lift and measured trough weigh sensor attached to pulley. for the
automatic feeding system, selenoid valve is the main part to control
feeding intensity and quantity, the valve is attached directly to fodder
tank, NodeMCU as microcontroller attached to valve, weight sensor also
pulley, the center of those three is Raspberry Pi as main data processing
and cominication traffic control. MQTT used as communication
protocol so NodeMCu need to be in rang of Raspberry Pi’s Local server.
this prototype used approx 0.5 m3 pound, so it can only fit 1-20 fish, and
only need AC 220v signal supply with 6-28 watt power usage (4 from
raspberry pi and 2-24 from 24v regulator). there is failure to develop
pulley system but it can be done manually, also need at least 10 times try
to get right number to get good result on weight sensor and automatic
feeder with 11% error range.

Item Type: Thesis (Undergraduate)
Uncontrolled Keywords: Electric Valve, Katrol, NodeMCU, MQTT, Raspberry pi, Sensor Berat
Subjects: T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK2861 Electric relays
T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK5103.8 Switching systems
T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK5105.585 TCP/IP (Computer network protocol)
T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK7878 Electronic instruments
T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK7888.3 Digital computers
Divisions: Faculty of Vocational > 36304-Automation Electronic Engineering
Depositing User: A.Hadziq Masfuh
Date Deposited: 15 Mar 2022 04:17
Last Modified: 15 Mar 2022 04:17
URI: http://repository.its.ac.id/id/eprint/93622

Actions (login required)

View Item View Item