Kuantifikasi kenyamanan visual dengan daylight factor method pada ruang baca Teknik Fisika ITS Surabaya

Sari, Nike Besta (2017) Kuantifikasi kenyamanan visual dengan daylight factor method pada ruang baca Teknik Fisika ITS Surabaya. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[img]
Preview
Text
2413100008 - Undergraduate_Theses.pdf - Published Version

Download (2MB) | Preview

Abstract

Ruang Baca Teknik Fisika ITS memiliki lubang cahaya di sisi timur dan barat yang menyebabkan cahaya matahari yang diterima oleh ruangan melebihi yang dibutuhkan oleh pengguna ruangan sehingga mengurangi kenyamanan visual pengguna ruangan. Kenyamanan visual dapat di kuantifikasikan menggunakan faktor pencahayaan alami siang hari atau daylight factor (DF). Tugas akhir ini melakukan evaluasi terhadap Ruang Baca Teknik Fisika ITS yang masih belum beroperasional dan memberikan rekomendasi untuk mendapatkan kenyamanan secara visual. Perhitungan DF pada beberapa titik ukur sudah sangat memenuhi syarat minimal sesuai SNI 03-2396-2001 yaitu 6% hingga 14%. Nilai DF tersebut diuji dengan melihat tingkat pencahayaan dan tingkat kesilauan ruangan yang diperoleh melalui simulasi. Dari ketiga desain yang telah dirancang yaitu menggunakan teralis, tata ruang dan pemilihan faktor reflektansi, dan perpanduan dari desain pertama dan kedua, diperoleh hasil yang sesuai yaitu pada desain kedua dengan DF melebihi 2,275% pada titik ukur utama, 0,91% pada titik ukur samping dan memiliki indeks kesilauan kurang dari 19. ===================================================================== The Reading Room Engineering Physics ITS has a window on the east and west sides that causes the light of sun received by the room exceed the user required, thus reducing the visual comfort of the user. Visual comfort can be quantified using daylight factor (DF). This final project, to evaluate the Reading Room Engineering Physics ITS that has not been operational and give a recommendation to get the visual comfort. The calculation of DF at some references point has been exceed the minimum requirement accordance with the SNI 03-2396-2001 between 6% until 14%. The DF values are tested by looking at the level of illumination and glare index of the room obtained through the simulation. Of the three designs that have been designed that is using trellis, spatial and the selection of reflectance of materials, and combination of the first and second design, obtained the corresponding result that is in the second design with DF more than 2.278% at the main references point, more than 0.01% at the side of references point and the glare index of less than 19.

Item Type: Thesis (Undergraduate)
Additional Information: RSF 621.32 Sar k
Uncontrolled Keywords: daylight factor, sky component, level of illumination, glare index
Subjects: Q Science > QC Physics > QC475 Photoluminescence
T Technology > TH Building construction
Divisions: Faculty of Industrial Technology > Physics Engineering > (S1) Undergraduate Theses
Depositing User: Nike Besta Sari
Date Deposited: 06 Oct 2017 03:28
Last Modified: 08 Mar 2019 02:51
URI: http://repository.its.ac.id/id/eprint/44606

Actions (login required)

View Item View Item