Azis, Anissa (2019) Rancang Bangun Sistem Pendeteksi Fibrete Gandeng Menggunakan Sensor Photoelectric. Diploma thesis, Institut Teknologi Sepuluh Nopember.
Preview |
Text
10311600000023_Non_Degree.pdf Download (4MB) | Preview |
Abstract
Pemasangan sensor photoelectric untuk mengurangi defect fibrete produk pasta gigi pada incline conveyor PT. Unilever Indonesia, Tbk. Rungkut dirancang untuk meningkatkan efektifitas dan efisiensi berproduksi perusahaan. Dikarenakan seringkali fibrete pasta gigi tidak terisolasi secara sempurna menyebabkan fibrete terisolasi secara gandeng (double fibrete) yang dapat menimbulkan masalah dalam hal safety, quality, dan productivity yang sangat mempengaruhi kualitas kinerja perusahaan. Oleh karena itu dibutuhkan alat yang digunakan untuk mendeteksi double fibrete. Pemasangan sebuah sistem pada konveyor untuk mendeteksi double fibrete menggunakan dua buah sensor photoelectric untuk mendeteksi adanya double fibrete, apabila dua buah sensor photoelectric mendeteksi adanya double fibrete maka motor konveyor akan berhenti dan warning alarm akan berbunyi dengan menggunakan mikrokontroler Arduino Uno. Terdeteksinya double fibrete akan menghasilkan counter yang akan ditampilkan pada platform IoT yaitu Thinger.io. Ketika motor konveyor berhenti maka untuk menghidupkan kembali motor konveyor dengan menekan tombol pada push button.
Hasil dari alat sistem pendeteksi double fibrete ini sensor photoelectric mampu mendeteksi dengan jarak antara 0,4 cm – 10 cm. Waktu yang dibutuhkan sensor untuk mengirim data counter pada Thinger.io yaitu antara ± (0,65 – 1,32)s. Persentase terjadinya kesalahan pendeteksi pada double fibrete horizontal sebesar 10%, dan secara vertikal sebesar 2,5% yang disebabkan karena kesalahan deteksi ataupun posisi fibrete pada saat proses deteksi kurang presisi.
==================================================================================================================================
Installation of photoelectric sensors to reduce defects in toothpaste products at PT. Unilever Indonesia, Tbk. Rungkut is designed to increase the effectiveness and efficiency of the company’s production. Because often toothpaste fibrous is not completely isolated, it causes double fibrete which can cause problems in terms of safety, quality, and productivity that greatly affect the quality of the company’s performance. Therefore was need a tool that is used to detect doubt fibrous. Installation of a system on a conveyor to detect double fibrete using two photoelectric sensors to detect the presence of double fibrous then the presence of double fibrous then the motor conveyor will stop and a warning alarm will sound. Detection of double fibrete will produce a counter that will be displayed on the IoT platform, Thinger.io. When the conveyor motor stops then to revive the conveyor motor by pressing the button on the push button. The result of this double fibrete detection system is often a mistake in the process of detecting fibrous by a photoelectric sensors. In this tool using a photoelectric sensors with a detecting distance between ±(0.4 – 10) cm. The time it takes the sensors to send a data counter to Thinger.io is between ±(0.65 – 1.32)s. Percentage of detecting errors in horizontal double fibrete is 10%, and verticall is 2.5% due to fault detection or fibrous position when the detection process is less precise.
| Item Type: | Thesis (Diploma) |
|---|---|
| Additional Information: | RSEO 629.895 Azi r-1 2019 |
| Uncontrolled Keywords: | Sensor Photoelectric, Konveyor, Arduino Uno, Thinger.io. |
| Subjects: | T Technology > TK Electrical engineering. Electronics Nuclear engineering T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK7871.674 Detectors. Sensors |
| Divisions: | Faculty of Vocational > 36304-Automation Electronic Engineering |
| Depositing User: | Anissa Fahira Azis |
| Date Deposited: | 10 Aug 2026 02:43 |
| Last Modified: | 10 Aug 2026 02:43 |
| URI: | http://repository.its.ac.id/id/eprint/68110 |
Actions (login required)
 |
View Item |