Perancangan Mesin Otomasi di Divisi Machinery PT. Denso Manufacturing Indonesia

Rahman, Hafid (2022) Perancangan Mesin Otomasi di Divisi Machinery PT. Denso Manufacturing Indonesia. Project Report. [s.n.], [s.l.].

Text Laporan Magang PT Denso Manufacturing Indonesia.pdf - Accepted Version Download (2MB)

Abstract

Pada sistem pneumatik, jenis valve yang digunakan disini itu ada 3, yaitu 2 PD (2 Position Double Solenoid), 3 PD (3 Position Double Solenoid) dan 3 PS (3 Position Single Solenoid). Dalam penerapannya apabila cylindernya bergerak secara vertical biasanya menggunakan tipe 3PD Closed Center serta menggunakan released valve atau finger valve. Jika, untuk bergereak horizontal maju mundur menggunakan tipe solenoid 2PD. Kemudian, untuk gripper biasanya menggunakan tipe 2PD ditambah individual sup spacer, sehinga ketika emergency di tekan, chuck / penjepit gripper tidak lepas. Adapun Force dari setiap aktuator tidak lebih dari 15 kgf atau 147,1 N. Spring Assembly Jig Machine ini dapat di adjust maju mundur maupun naik turun, sehingga diharapkan dapat dengan mudah mencapai posisi yang paling presisi dalam proses assembly nya.
===========================================================================================================================
In pneumatic systems, there are 3 types of valves used here, namely 2 PD (2 Position Double Solenoid), 3 PD (3 Position Double Solenoid) and 3 PS (3 Position Single Solenoid). In practice, when the cylinder moves vertically, it usually uses the 3PD Closed Center type and uses a released valve or finger valve. If, to move horizontally back and forth using a 2PD type solenoid. Then, the gripper usually uses the 2PD type plus an individual sup spacer, so that when an emergency is pressed, the gripper chuck / clamp does not come off. The Force of each actuator is not more than 15 kgf or 147.1 N. This Spring Assembly Jig Machine can be adjusted back and forth or up and down, so it is hoped that it can easily reach the most precise position in the assembly process.

Item Type:	Monograph (Project Report)
Uncontrolled Keywords:	Pneumatic, Valve, Spring Assembly Jig, Silinder, Cylinder
Subjects:	T Technology > T Technology (General) T Technology > TJ Mechanical engineering and machinery T Technology > TJ Mechanical engineering and machinery > TJ230 Machine design
Divisions:	Faculty of Vocational > Mechanical Industrial Engineering (D4)
Depositing User:	Hafid Rahman
Date Deposited:	01 Aug 2023 01:44
Last Modified:	01 Aug 2023 01:44
URI:	http://repository.its.ac.id/id/eprint/101130

Actions (login required)

View Item