Studi Eksperimen Run-Up dan Overtopping Gelombang Pada Concrete Armor Beton Berpori Untuk Seawall

Fuad, Hafizh Farhan Haditya (2022) Studi Eksperimen Run-Up dan Overtopping Gelombang Pada Concrete Armor Beton Berpori Untuk Seawall. Other thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 04311840000016-Undergraduate_Thesis.pdf] Text
04311840000016-Undergraduate_Thesis.pdf - Accepted Version
Restricted to Repository staff only until 1 October 2024.

Download (6MB) | Request a copy

Abstract

Seawall merupakan salah satu bentuk perlindungan pantai yang berfungsi untuk melindungi pantai dengan mencegah limpasan gelombang mencapai darat. Gelombang yang menghantam sebuah struktur pantai akan terbawa naik oleh momentum dan merayap ke atas atau sering disebut dengan run-up. Kemudian gelombang yang melebihi puncak struktur pantai adalah overtopping. Maka dari itu run-up dan overtopping gelombang sangat penting dalam perencanaan struktur perlindungan pantai agar dapat melindungi pantai secara efektif dari erosi atau abrasi. Dalam penelitian ini dilakukan eksperimen run-up dan overtopping gelombang dengan variasi sudut kemiringan struktur seawall. Armor Beton Berpori akan digunakan sebagai unit lapis lindung pada struktur seawall dimana Beton Berpori dapat menampung batu batu kecil. Hasil yang didapatkan dari eksperimen yang telah dilakukan nilai run-up dan overtopping gelombang semakin besar jika sudut kemiringan struktur semakin besar (curam), dan sebaliknya jika sudut kemiringan struktur semakin kecil (landai) maka nilai run-up dan overtopping gelombang semakin kecil. Pada tinggi dan periode gelombang yang sama nilai run up oleh kemiringan tercuram 1:1 yaitu 0,150 m merupakan yang terbesar, kemudian pada kemiringan 1:1,5 yaitu 0,132 m, dan kemiringan paling landai 1:2 yaitu 0,128 m merupakan yang terkecil. Sedangkan overtopping discharge terbesar dari setiap kemiringan, pada kemiringan tercuram 1:1 yaitu 1,15E-05 m3/s/m merupakan yang terbesar, kemudian pada kemiringan 1:1,5 yaitu 6,49E-06 m3/s/m, dan kemiringan paling landai 1:2 yaitu 5,05E-06 m3/s/m merupakan yang terkecil.
===================================================================================================================================
Seawall is a form of coastal protection that serves to protect the coast by preventing wave runoff from reaching the land. Waves that hit a coastal structure will be carried up by momentum and creep up or often referred to as run-up. Then the wave that exceeds the crest of the coastal structure is overtopping. Therefore, wave run-up and overtopping are very important in the design of coastal protection structures in order to effectively protect the coast from erosion or abrasion. In this study, run-up and wave overtopping experiments were carried out with variations in the angle of inclination of the seawall structure. Porous Concrete Armor will be used as a protective layer unit on the seawall structure where the Porous Concrete can accommodate small stones. The results obtained from experiments that have been carried out are the run-up and overtopping values of the waves getting bigger if the angle of the structure slope is getting bigger (steep), and conversely if the slope angle of the structure is getting smaller (sloping) then the values of run-up and overtopping waves are getting smaller. At the same wave height and wave period, the run-up value with the steepest slope of 1:1 are 0.150 m is the largest, then at a slope of 1:1.5 are 0.132 m, and the most sloping slope of 1:2 are 0.128 m is the smallest. While the largest overtopping discharge from each slope, the steepest slope of 1:1 is 1.15E-05 m3/s/m is the largest, then at a slope of 1:1.5 are 6.49E-06 m3/s/m, and the most sloping slope of 1:2are 5.05E-06 m3/s/m is the smallest.

Item Type: Thesis (Other)
Additional Information: RSKe 627.58 Fua s-1 2022
Uncontrolled Keywords: run-up, overtopping, seawall, Beton Berpori, Porous Concrete
Subjects: T Technology > TC Hydraulic engineering. Ocean engineering > TC335 Sea-walls--Design and construction
Divisions: Faculty of Marine Technology (MARTECH) > Ocean Engineering > 38201-(S1) Undergraduate Thesis
Depositing User: - Davi Wah
Date Deposited: 13 May 2024 08:23
Last Modified: 13 May 2024 08:23
URI: http://repository.its.ac.id/id/eprint/107955

Actions (login required)

View Item View Item