Studi Teknis Pemakaian Thermal Oil Boiler sebagai Pemanas Sistem Bahan Bakar MFO pada KM Dorolonda

Firmansyah, Yulid Anji (2008) Studi Teknis Pemakaian Thermal Oil Boiler sebagai Pemanas Sistem Bahan Bakar MFO pada KM Dorolonda. Other thesis, Institut Teknologi Sepuluh Nopember.

Text 4202100003-Undergraduate_Thesis.pdf Restricted to Repository staff only Download (18MB)

Abstract

Thermal oil boiler menggunakan jluida pemanav sejenis minyak khusus sebagai pembawa panas, dimana minyak lersebul dipanav/can di boiler kemudian disirkulasilcan Ice sistem. Energi panas yang dibawa oleh jluida pemanas tersebut kemudian dipindah/can k.e MFO mela/ui k.oi/-k.oil dan alaJ-alat penu/car panas yang terpasang pada sislem bahan bak.ar MFO IGf Dorolonda. Dalam studi teknis ini dilakukan pengumpulan data mengenai sistem pemana.r; mengguna/can thermal oil boiler khususnya untuk apli/casi di /capal. Survey terhadap sistem bahan ha/car di lcapal dilakulran untuk mengetahui existing equipment yang Ielah terpasang. Perhitungan lerhadap beban pemanasan pada seliap /coil dan heaJer yang a/can dipasang dilalculran untuk mendapalkan /capasitas dari boiler. Dari beban pemanasan liap peralatan lremudian direncanalran laju a/iran fluida pemanas yang dibutuh/can untuk dapat memindahlcan panas sebesar beban pemanasan pada tiap peralatan. Dalam perhitungan ini digunalcan fluida pemana.'i Caljlo LF produksi Petro Canada. Dari hasil perhitungan didapatkan /capasilas peralatan pada desain pemanas dengan mengguna/can thermal oil boiler pada KM Dorolonda. Kapasitas boiler sebesar 465 kW dengan /capasilas a/iran jluida pemanas 22 m3/jam. Sislem thermal oil boiler mengguna/can pompa circulating 22 m3/jam dan pompa suplai 2 m3/jam.
======================================================================================================================================
Thermal oil boiler using thermal fluid from kind of special oil as heat carrier, where the special oil heated on boiler and afterwards circulated on the heating system. Then, the heat energy that carrying on thermal fluid transfe"ed to MFO pass through healing coil and heat exchanger that installed in MV Dorolonda MFO fuel oil system. This technical study carry out data collecting about heating system operation using thermal oil boiler especially for ship application. System survey has done to found out existing equipment that installed in system. Heating load for each coil and heat exchanger calculated to found out boiler capacity that must be installed on the heating system. Then, flow capacity of thermal fluid can be calculated in order to give heat transfer as sufficient as each equipment heating load. Ca/jTo LF that produced by Petro Canada used as thermal fluid in this calculations. The calculation resulting capacity of equipment that will be installed in heating design using thermal oil boiler on MV Dorolonda. The capacity of boiler from calculation is 465 kW with flow capacity of thermal fluid 22m31hour. In system design of thermal oil heating operation, the system installed with 22m3/hour circulating pump and supply pump with 2m3/hour in capacity.

Item Type:	Thesis (Other)
Additional Information:	RSSP 623.87 Fir s
Uncontrolled Keywords:	boiler,jluidapemanas, bahan bakar, MFO,boiler, themull fluid, MFO
Subjects:	V Naval Science > VM Naval architecture. Shipbuilding. Marine engineering > VM731 Marine Engines
Depositing User:	magang .
Date Deposited:	21 Oct 2026 01:36
Last Modified:	21 Oct 2026 01:36
URI:	http://repository.its.ac.id/id/eprint/145727

Actions (login required)

View Item