Ramadhan, Galih (2017) Analisa Kelelahan Pipa Pada Saat Instalasi Di Berbagai Sudut Stinger Dan Ukuran Pipa. Undergraduate thesis, Instittut Teknologi sepuluh Nopember.
Preview |
Text
4313100114-Undergraduate_Theses.pdf - Published Version Download (1MB) | Preview |
Abstract
Dalam beberapa kasus saat instalasi pipa di lepas pantai, terkadang
beberapa kendala teknis tidak dapat dihindari. Kendala teknis ini dapat meliputi
kerusakan pada alat instalasi seperti tensioner, mesin las, generator ataupun
kerusakan pada system mooring, navigasi, tenaga penggerak kapal dan lain-lain.
Hal tersebut bisa berakibat terhentinya proses instalasi pipa untuk waktu yang
cukup lama. Dalam kondisi ini, pipa dapat diturunkan ke dasar laut atau
dipertahankan selama durasi tertentu hingga pipa mencapai batas kelelahan yang
diijinkan sesuai dengan hasil analisa, analisa tersebut akan menghasilkan berapa
lama durasi pipa dapat digantung.
Dalam DNV OS-F101 2013 Section 5 D.811, dijelaskan bahwa biasanya
allowable yang digunakan antara installation, as laid, and operation is 10%,10%
and 80%. Dimana pada bagian instalasi perlu perhitungkan umur kelelahannya.
Pada pipa 24 inch dengan sudut stinger 60 mengalami over stress serta
pada pipa 16 dan 20 inch juga mendekati over stress . Stress range didapat dari
analisa dinamik karena adanya gelombang yang menyebabkan stress pada pipa
berubah-ubah. Dari stress range yang terjadi dapat dihitung umur kelelahan pipa,
Dengan adanya penambahan sudut stinger mampu mengecilkan stress yang terjadi
pada pipa agar tidak over stress dan juga akan berpengaruh pada lamanya umur
pipa akibat beban siklik yang terjadi. Umur standby time terkritis adalah pada
pipa 24 inch terhadap sudut stinger 80 sebesar 0,138 hari atau 3.312 jam.
========================================================================================================================
In some cases during the installation of offshore pipelines, sometimes
some technical problems unavoidable. Technical constraints can include damage
to the installation tool such as tensioner, welding machines, generators or damage
to the mooring system, navigation, propulsion boats and others. This can result in
interruption of process piping installation for quite a long time. In this condition,
the pipe can be lowered to the seabed or maintained for a specific duration until
the pipe reaches the allowable fatigue limit according with the results of the
analysis, the analysis will produce how long the pipe can be hung.
In DNV OS-F101 2013 Section 5 D.811, explained that normally the
allowable are used between installation, as laid, and operation is 10%, 10% and
80%. Where in the installation should calculated the fatigue life.
In the 24 inch pipe with an angle of stinger 6° has over stress and the 16
and 20 inch pipe was also approached over stress. Stress range obtained from
dynamic analysis because of the waves that cause stress on the pipe changeable.
From stress range that occur can be calculated the fatigue life of the pipeline, with
the addition of stinger’s angle is able to shrink the stress that occurs in the pipe in
order not to over-stress and will also affect on the length of life of the pipeline due
to cyclic loading that occurs. The most critical standby time is in the 24 inch pipe
on stinger’s angle 8° amounted to 0,138 days or 3,312 hours.
| Item Type: | Thesis (Undergraduate) |
|---|---|
| Uncontrolled Keywords: | Pipeline, Installation, Technical Constraints, Fatigue Life, Instalasi, Kendala Teknis, Umur Kelelahan. |
| Subjects: | T Technology > T Technology (General) |
| Divisions: | Faculty of Marine Technology (MARTECH) > Ocean Engineering > 38201-(S1) Undergraduate Thesis |
| Depositing User: | GALIH GALIH RAMADHAN |
| Date Deposited: | 02 May 2017 07:55 |
| Last Modified: | 08 Mar 2019 06:39 |
| URI: | http://repository.its.ac.id/id/eprint/3724 |
Actions (login required)
 |
View Item |