Maulavi, Rizal (2017) Rancang Bangun Aktuator Servo Operating Valve Di Output Steam Pada Prototype Dan Simulator Boiler Di Workshop Instrumentasi. Diploma thesis, Institut Teknologi Sepuluh Nopember.
Preview |
Text
2414031007-Non_Degree.pdf - Published Version Download (3MB) | Preview |
Abstract
Dalam Pembangkit Listrik Tenaga Uap, untuk memberikan
listrik yang memadai, sumber steam harus sesuai dengan kriteria,
khususnya tekanan. Untuk alasan kriteria tersebut maka perlu
suatu sistem pengendalian terhadap variabel tersebut. Oleh karena
itu, dilakukan pembuatan tugas akhir ini mengenai rancang
bangun aktuator servo operating valve di output steam pada
prototype and simulator boiler di workshop instrumentasi..
Adapun instrumen yang digunakan yaitu mikrokontroler atmega
16, final control element berupa servo operating valve dan
pressure trasmitter Altronic Press. Sensor P/N 691201100. Dari
hasil pengambilan data tugas akhir ini, dilakukan uji sensor pada
pressure transmitter dan pembacaan Pressure Transmitter pada
sistem. Set point pressure yang diinginkan yaitu 4 bar. Dari hasil
pengujian alat sensor didapatkan didapat nilai rancang bangun
aktuator servo operating valve tersebut memiliki nilai error
dibawah 5% yaitu 0,279%. Sehingga dari tugas akhir ini, telah
dihasilkan rancang bangun sistem pengendalian pressure steam
output yang berjalan dengan normal.=======================In a Steam Power Plant, to provide sufficient
electricity, the steam source must conform to the criteria,
especially pressure. For reasons such criteria then need a system
of control of these variables. Therefore, this final project is done
about the design of actuator servo operating valve at steam
output in prototype and boiler simulator in instrumentation
workshop .. The instrument used is microcontroller atmega 16,
final control element in the form of servo operating valve and
pressure trasmitter Altronic Press . Sensor P / N 691201100.
From the results of this final data collection, tested the sensor on
the pressure transmitter and readings Pressure Transmitter on
the system. The desired set point pressure is 4 bars. From the
results of testing the sensor obtained obtained the value of the
design of actuator servo operating valve has an error value below
5% is 0.279%. So from this final project, it has been produced the
design of pressure steam output control system that run normally.
.
| Item Type: | Thesis (Diploma) |
|---|---|
| Additional Information: | RSIn Mau r |
| Uncontrolled Keywords: | servo, operating, valve, boiler |
| Subjects: | T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK201 Electric Power Transmission |
| Divisions: | Faculty of Industrial Technology > Physics Engineering > (D3) Diploma 3 |
| Depositing User: | Maulavi Rizal |
| Date Deposited: | 09 Feb 2018 03:55 |
| Last Modified: | 06 Mar 2019 04:17 |
| URI: | http://repository.its.ac.id/id/eprint/47032 |
Actions (login required)
 |
View Item |