Juniarsyah, Diah Ulfa (2018) Perancangan Sistem Pengepakan pada Produksi Teh Gelas Menggunakan Sistem Penggerak Pneumatik Berbasis Mikrokontroler. Diploma thesis, Institut Teknologi Sepuluh Nopember.
Preview |
Text
10511500000067-Non_Degree.pdf - Accepted Version Download (2MB) | Preview |
Abstract
Perkembangan di Indonesia sangat pesat, karena itu masalah produksi pun bermunculan. Salah satunya permasalahan pengepakan dalam industri kecil. Pengepakan masih dinilai kurang efektif dan masih kurang berkembang dalam menerapkan teknologi. Dalam penelitian ini digunakan mesin teh gelas dengan sistem penggerak pneumatik yang dapat mempermudah sistem pengepakan. Penggerak dari Sistem pneumatik menggunakan arah gerakan, besar gaya, dan kecepatan gerak piston dalam silinder dikontrol dengan menggunakan katup dan Besar gaya yang dikenakan pada piston bergantung pada besarnya tekanan udara. penggerak pneumaticair hydro dengan diameter cylinder (ds) = 16 mm, diameter piston (dp) = 10mm panjang langkah cylinder 200 mm diperlukan untuk merealisasikan sistem pengepakan dengan berat beban total sebesar lebih kurang 2.11 kgf. dapat mengepak pengisian dari jumlah 6 gelas yang telah terisi yaitu dengan ukuran 26.7 x 17.8 x 12.7 cm.
===================================================================================================
The development in Indonesia is very rapid, therefore production problems arise. One of them is packaging problem in small industry. Packaging is still considered less effective and less developed in applying technology. In this study used tea glass machine with pneumatic drive system that can facilitate the packaging. As a driving force of the Pneumatic System using the direction of movement, the force, and speed of the piston motion in the cylinder are controlled by means of the valve and The force applied to the piston depends on the amount of air pressure. pneumaticair hydro drive with cylinder diameter (ds) = 16 mm, piston diameter (dp) = 10mm 200 mm cylinder step length required to realize the packing system with a total load weight of approximately 2.11 kgf. In packing box system that can pack 6 glasses that have been filled with the size of 26.7 x 17.8 x 12.7 cm.
| Item Type: | Thesis (Diploma) |
|---|---|
| Uncontrolled Keywords: | pneumatic cylinder, packing system automation, pneumaic drive. |
| Subjects: | T Technology > T Technology (General) |
| Divisions: | Faculty of Vocational > Instrumentation Engineering |
| Depositing User: | diah ulfa juniarsyah |
| Date Deposited: | 03 Aug 2021 20:54 |
| Last Modified: | 03 Aug 2021 20:54 |
| URI: | http://repository.its.ac.id/id/eprint/58274 |
Actions (login required)
 |
View Item |