Prasetyo, Eric (2015) Studi Aplikasi Risk-Based Inspection (RBI) Pada Process Piping PL-117-A 0,75", 2", 3", dan 4" Dengan Metode API 581 Base Resource Document di Industri Minyak dan Gas. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.
Preview |
Text
271110118-Undergraduate_ Theses.pdf - Published Version Download (3MB) | Preview |
Preview |
Text
271110118-Presentation.pdf - Presentation Download (3MB) | Preview |
Preview |
Text
271110118-Paper.pdf - Published Version Download (765kB) | Preview |
Abstract
Based Inspection (RBI) atau inspeksi berbasis risiko
merupakan metode yang digunakan untuk membuat jadwal
inspeksi berdasarkan tingkat risiko yang dimiliki oleh suatu
komponen pada suatu sistem. Objek pada penelitian ini ialah
process piping PL-117-A 0,75”, 2”, 3”, dan 4”. Process piping
PL-117-A 0,75”, 2”, 3”, dan 4” merupakan oil outlet dari sebuah
production separator, yang memiliki tekanan dan temperatur
yang tidak sama dengan lingkungan di luar pipa. Oleh karena itu,
tentunya process piping tersebut memiliki risiko untuk terjadi
kegagalan. Agar dapat meminimalisir terjadinya kegagalan, maka
harus dilakukan inspeksi yang sesuai dengan risiko pada process
piping tersebut. Dengan menggunakan dasaran API 581 Base
Resource Document, selanjutnya akan ditentukan tingkat risiko ,
metode, dan penjadwalan inspeksi dari process piping PL-117-A
0,75”, 2”, 3”, dan 4”. Analisis yang dilakukan menggunakan
metode semi-kuantitatif pada appendix B API 581 Base Resource
Document. Sehingga hasil yang diperoleh ialah pipa dengan
diameter 0,75”, 2”, dan 3” memiliki tingkat risiko yang rendah,
serta tidak perlu dilakukan inspeksi selanjutnya, tetapi dilakukan
reparasi. Sementara untuk pipa dengan diamter 4” memiliki
tingkat risiko sedang, dan harus segera dilakukan reparasi karena
ketebalan aktual pipa lebih rendah dari ketebalan pipa yang
diperbolehkan. ============ Risk-Based Inspection (RBI) is the method used to make
the inspection schedule based on the level of risk that is owned by
a component in a system. The object of this research is process
piping PL-117-A 0.75 ", 2", 3 ", and 4". Process piping PL-117-A
0.75 ", 2", 3 ", and 4" is an oil outlet of a production separator,
which has a pressure and temperature are not the same with the
environment outside of the pipe. Therefore, the process piping
have risk for failure occurs. In order to minimize the occurrence
of failure, it must be inspected in accordance with the risk in the
process piping. By using reference from API 581 Base Resource
Document, next it will be determined level of risk, methods, and
scheduling inspections of process piping PL-117-A 0,75 ", 2", 3 ",
and 4". The analysis was performed using a semi-quantitative
method in appendix B of API 581 Base Resource Document.
Thus, the results obtained were pipes with a diameter of 0.75", 2",
and 3” has a low level of risk, and do not need further inspection,
but do repairs. While for the pipe with a diameter of 4 " has a
medium level of risk, and should be done immediately repair
because the actual thickness of the pipe is lower than the required
thickness of the pipe.
| Item Type: | Thesis (Undergraduate) |
|---|---|
| Additional Information: | RSMt 658.155 Pra s |
| Uncontrolled Keywords: | RBI; Process Piping; API 581 Base Resource Document; Semi-Quantitative Analysis; RBI; Process Piping; API 581 Base Resource Document; Analisis Semi-Kuantitatif |
| Subjects: | H Social Sciences > HD Industries. Land use. Labor > HD3656 Inspection. Factory inspection T Technology > TJ Mechanical engineering and machinery > TJ930 Pipelines (General). Underwater pipelines. |
| Divisions: | Faculty of Industrial Technology > Material & Metallurgical Engineering > 28201-(S1) Undergraduate Thesis |
| Depositing User: | - Davi Wah |
| Date Deposited: | 27 Mar 2019 03:30 |
| Last Modified: | 27 Mar 2019 03:32 |
| URI: | http://repository.its.ac.id/id/eprint/62600 |
Actions (login required)
 |
View Item |