Pemodelan dan Fabrikasi Modul Termoelektrik Generator Menggunakan Semikonduktor Tipe-p SbTe dan tipe-n BiTe

Afiyanti, Meylusari Maqhfirotul (2019) Pemodelan dan Fabrikasi Modul Termoelektrik Generator Menggunakan Semikonduktor Tipe-p SbTe dan tipe-n BiTe. Other thesis, Institut Teknologi Sepuluh Nopember.

Text 01111540000063-Undergraduate_Theses.pdf Restricted to Repository staff only Download (1MB) | Request a copy

Abstract

Penelitian yang berjudul “pemodelan dan fabrikasi modul termoelektrik generator (TEG) menggunakan semikonduktor tipe-p SbTe dan tipe-n BiTe” bertujuan untuk mengetahui nilai tegangan keluaran, daya keluaran dan efesiensi terbaik dari pengujian dan pemodelan modul termoelektrik generator. Modul termoelektrik generator tersusun dari sepasang semikonduktor tipe-p SbTe dan tipe-n BiTe. Pengujian dilakukan dengan open circuit (tanpa beban) dan close circuit (dengan beban) sebesar 1 Ω. Dari pengujian dihasilkan temperatur sisi panas dan dingin, nilai tegangan keluaran dan daya keluaran modul TEG. Pengujian dilakukan tiga kali pengulangan untuk open circuit dan close circuit. Pemodelan modul TEG menggunakan software Ansys 19.2 Academic dan Solidworks 2013. Pemodelan dilakukan dengan open circuit dan close circuit seperti pengujian. Didapatkan besar tegangan keluaran maksimum open circuit pada modul SbTe 3h dan BiTe HP450 dengan keakuratan 98,3% dan pada close circuit dengan keakuratan 96,8% pada modul SbTe 3h dan BiTe HP450. Didapatkan nilai daya keluaran tertinggi sebesar 0,36 mW pada modul SbTe 3h dan BiTe HP450.
===================================================================================================================================
The research entitled "modeling and fabrication of thermoelectric generation (TEG) module by semiconductor p-type SbTe and n-type BiTe" aimed to know the best voltage output, power output and efficiency value of modeling and thermoelectric generator module test. The thermoelectric generator module is composed by a pairs of p-type SbTe and n-type BiTe semiconductor. Testing is done by open circuit (no load) and close circuit (with a load) of 1 Ω. From the test it is produced the hot and cold side temperature, the value of the output voltage and the output power of the TEG module. Testing is done three repetition for open circuit and close circuit. TEG module modeling uses Ansys 19.2 Academic and Solidworks 2013 software. Modeling is done by open circuit and close circuit such as testing. TEG module obtained the maximum open circuit output voltage of SbTe 3h and BiTe HP450 module with accuracy of 98.3% and at the close circuit with 96.8% accuracy in the SbTe 3h and BiTe HP450 module. The module obtained the highest output power value of 0.36 mW in SbTe 3h and BiTe HP450 module.

Item Type:	Thesis (Other)
Uncontrolled Keywords:	efesiensi, daya, tegangan, termoelektrik generator
Subjects:	Q Science Q Science > QC Physics Q Science > QC Physics > QC271.8.C3 Calibration Q Science > QC Physics > QC271 Temperature measurements Q Science > QC Physics > QC 611.97.T46 Temperature effects. Including transition temperature
Divisions:	Faculty of Natural Science > Physics > 45201-(S1) Undergraduate Thesis
Depositing User:	Meylusari Maqhfirotul Afiyanti
Date Deposited:	20 Jul 2026 02:36
Last Modified:	20 Jul 2026 02:36
URI:	http://repository.its.ac.id/id/eprint/64277

Actions (login required)

View Item