Rancang Bangun Sistem Kontrol Pompa Air pada Tandon Air berbasis Android

Hisbullah, Alfian Imam (2019) Rancang Bangun Sistem Kontrol Pompa Air pada Tandon Air berbasis Android. Diploma thesis, Institut Teknologi Sepuluh Nopember.

Text 10311600010035-Non_Degree.pdf - Accepted Version Restricted to Repository staff only Download (34MB) | Request a copy

Abstract

Hadirnya pompa air ini mempermudah mengalirnya air. Tapi pastinya, ada juga masalah yang seringkali ditimbulkan oleh pompa air itu sendiri. Lupa mematikan pompa air ketika tandon sudah penuh, akibatnya air terus mengalir hingga meluap banyak air yang terbuang sia–sia. Dan juga lupa menyalakan pompa air ketika air di tandon sudah habis, akibatnya saat akan menggunakan air, tidak ada air yang mengalir dan harus menunggu tandon terisi air agar air dapat mengalir kembali. Dari permasalahan tersebut, pada proyek akhir ini dibuat Rancang Bangun Sistem Kontrol Pompa Air pada Tandon Air berbasis Android yang dapat memudahkan kita dalam mengontrol sistem pompa air. Di mana alat tersebut menggunakan mikrokontroler Wemos D1 R2 yang dapat me-monitoring sekaligus mengotomasisasi sistem kontrol pompa air melalui smartphone yang berbasis aplikasi pada android, yaitu aplikasi Blynk. Dari pengujian alat ini, alat ini dapat berjalan sesuai parameter yang telah ditentukan dalam program. Dalam pengujian didapatkan pengisian tandon air dengan keran air tertutp rapat selama 1 menit 10 detik dengan volume air 9,50 L. Di mana error rata-rata pembacaan sensor ultrasonik HC-SR04 sebesar 5,2% dan debit air dari pompa air DP-537 tetinggi sebesar 0,06 L/s dengan PWM sebesar 1023.
====================================================================================================================================
The presence of this water pump facilitates the flow of water. But of course, there are also problems that are often caused by the water pump itself. Forget to turn off the water pump when the water tank is full, as a result the water continues to flow until it overflows, as a result much water is wasted. Also often forget to turn on the water pump when the water in the water tank has run out, consequently when it will use water, there is no water flow and must wait for the water tank to fill with water so that the water can flow again. From these problems, in this final project a Water Pump Control System on Water Tank Android-based is designed to facilitate us in controlling the water pump system. Where the device uses the Wemos D1 R2 microcontroller that can monitor and automate the water pump control system via an smartphone based on Android applications, the Blynk application. From the result after testing this tool, it can run according to the parameters specified in the program. In the test it was found that the water tank was filled with faucet closed for 1 minute 10 seconds with 9.50 L volume of water. Where the average error of reading the HC- SR04 ultrasonic sensor is 5.2% and the maximum flows of water from the DP-537 water pump is 0.06 L/ s with 1023 of PWM.

Item Type:	Thesis (Diploma)
Uncontrolled Keywords:	Pompa Air, Sensor Ultrasonik, Android, Blynk, Water Pump, Ultrasonic Sensor, Android, Blynk.
Subjects:	T Technology > TK Electrical engineering. Electronics Nuclear engineering T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK5103.2 Wireless communication systems. Two way wireless communication T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK7871.674 Detectors. Sensors
Divisions:	Faculty of Vocational > 36304-Automation Electronic Engineering
Depositing User:	Hisbullah Alfian Imam
Date Deposited:	11 Aug 2026 07:18
Last Modified:	11 Aug 2026 07:18
URI:	http://repository.its.ac.id/id/eprint/68460

Actions (login required)

View Item