Prototype Sistem Kendali Intensitas Cahaya Lampu LED di Gudang Barang Jadi Menggunakan Arduino

Pusparani, Mey Devi (2019) Prototype Sistem Kendali Intensitas Cahaya Lampu LED di Gudang Barang Jadi Menggunakan Arduino. Diploma thesis, Institut Teknologi Sepuluh Nopember.

Text 10311600010018-Non_Degree.pdf - Accepted Version Restricted to Repository staff only Download (3MB) | Request a copy

Abstract

Sistem penerangan merupakan salah satu pemakaian energi listrik yang besar. Untuk itu perlu diupayakan penghematan energi pada sistem penerangan. Pada umumnya pengaturan penerangan menggunakan prinsip on-off dimana lampu hanya bekerja pada dua kondisi yaitu lampu menyala penuh ketika on atau off. Pengaturan penerangan dengan prinsip on-off hanya berdasarkan pada kondisi gelap terang ruangan tanpa menghiraukan kontribusi cahaya dari luar. Hal ini menyebabkan penggunaan energi listrik yang tidak efisien. Dari pemikiran tersebut maka diciptakan sistem kendali intensitas cahaya lampu LED di Gudang Barang Jadi (GBJ) menggunakan Arduino. Tujuannya agar lampu LED dapat menyesuaikan pencahayaannya sesuai dengan intensitas cahaya ruangan yang diinginkan atau set point. Pada pengendalian penerangan lampu LED menggunakan driver lampu LED yaitu MOSFET ditentukan oleh tegangan kontrolnya yaitu dari mikrokontroler arduino UNO yang sebelumnya telah mengolah data dari pembacaan iluminasi ruangan oleh modul sensor cahaya LDR. Sistem ini menghasilkan penerangan dengan dua kondisi yaitu ketika kondisi terang dengan intensitas cahaya ≤ 100 lux dan ketika kondisi redup dengan intensitas cahaya ≥ 100 lux.
====================================================================================================================================
Lighting system is one of the power consumption of large energy. Therefore, it is necessary to seek energy saving in the lighting system. In general, the lighting arrangement uses an on-off principle where the lamp only works on two conditions i.e. the lamp is fully lit when on or off. Lighting arrangement with on-off principle is based only on the bright dark conditions of the room regardless of outside light contributions. This leads to an inefficient use of electrical energy. From this thought it was created a light intensity control system LED in the finished goods warehouse (GBJ) using Arduino. The purpose of the LED light is to adjust the lighting according to the intensity of the desired room light or set point. In the illumination control of LED lamps using the LED light driver, the MOSFET is determined by the control voltage that is from a microcontroller of the UNO Arduino that had previously processed data from the illumination reading of the room by LDR light sensor module. This system generates lighting with two conditions namely when the condition is bright with a light intensity ≤ 100 lux and when the condition is dim with light intensity ≥ 100 lux.

Item Type:	Thesis (Diploma)
Uncontrolled Keywords:	Gudang Barang Jadi, Arduino Uno, MOSFET, Modul sensor LDR
Subjects:	T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK5103.8 Switching systems
Divisions:	Faculty of Vocational > 36304-Automation Electronic Engineering
Depositing User:	Mey Devi Pusparani
Date Deposited:	11 Aug 2026 03:07
Last Modified:	11 Aug 2026 03:07
URI:	http://repository.its.ac.id/id/eprint/69799

Actions (login required)

View Item