Perancangan Cetakan Helm Arung Jeram Dengan Proses Mold Injection

Alhuda, Haris Fadillah (2015) Perancangan Cetakan Helm Arung Jeram Dengan Proses Mold Injection. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 2108100098-Undergraduate_Thesis.pdf]
Preview
Text
2108100098-Undergraduate_Thesis.pdf - Accepted Version

Download (4MB) | Preview

Abstract

Helm pada kegiatan arung jeram adalah peralatan keselamatan yang utama. Salah satu
cara diproduksinya helm adalah dengan proses injection molding. Untuk mendapatkan produk
yang berkualitas bagus maka perlalu dilakukan perencanaan cetakan helm yang baik.
Pada tugas akhir ini, dilakukan perencanaan desain dan proses injection molding serta
estimasi biaya produksi cetakan helm Arung Jeram. Tahap awal yang dilakukan adalah dengan
memodelkan helm arung jeram secara 3D menggunakan software solidwork. Setelah itu simulasi
perencanaan cetakan yang telah dibuat menggunakan software Autodesk Moldflow adviser.
Adapun tujuan dari simulasi ini adalah untuk mendapatkan parameter proses injection Molding
yang terbaik agar dihasilkan produk helm arung jeram dan harus sesuai dengan kapasitas mesin
yang digunakan yaitu HAITIAN MA 900/260e. Material Mold base yang digunakan adalah baja
AISI P20. Tahap terakhir adalah menghitung estimasi biaya produksi dari cetakan helm Arung
Jeram tersebut.
Hasil yang didapat dari perencanaan cetakan ini adalah: Material helm yang digunakan
adalah HDPE. Jenis mold base yang digunakan menggunakan fixed plate dan moveable plat serta
jumlah cavity yang digunakan adalah satu buah. Parameter injeksi yang digunakan adalah:
 Mold Temperature: 43 oC
 Melt Temperature: 246,0 oC
 Injection Time: 0,8 sec
 Maximum Injection Pressure: 180 MPa
Proses pemesinan untuk membuat cetakan yaitu proses milling dan boring dengan menggunakan
mesin CNC (Computerized Numerical Control).
==================================================================================================
A helmet the work of the rafting is safety equipment whose principal. One of the ways to
producing a helmet is with the process of injection molding .To get the product which is good
quality then must to done planning a mold a helmet which good.
On this final paper, done the design and planning process of injection molding as well as
an estimate of the cost the production of a mold a helmet rafting.An early stage that done is with
a helmet model rafting in 3d using software solidwork.After that the simulation planning a mold
that has been created using autodesk software moldflow adviser of. The purpose of this simulation
was to get the process of injection of the parameters of a molding that best to products produced a
helmet rafting and must be in accordance with the capacity of the machine used namely HAITIAN
MA 900 / 260e.Mold base material that is used is steel aisi P20. The last stage is an estimate of the
cost counting production from a mold a helmet rafting.
The results of the mold is this: the material used was HDPE. Mold used in the use of a plate
and moveable plate fixed and the cavity used is one of them.Parameters injection is applicable in,
mold temperature: 43,33 oc, melt temperature 246,3 oc, injection time 0.8 sec and maximum
pressure injection, 180 MPA. Of the simulation menggunakam moldflow adviser acquired a defect
in the traps and venting. A process for machining to making mould is milling and boring by using
a computerized numerical control ( CNC ).

Item Type: Thesis (Undergraduate)
Additional Information: RSM 668.412 Alh p
Uncontrolled Keywords: Helm, Injection Molding, Simulasi, Proses Pemesinan
Subjects: T Technology > TJ Mechanical engineering and machinery
Divisions: Faculty of Industrial Technology > Mechanical Engineering > 21201-(S1) Undergraduate Thesis
Depositing User: Yeni Anita Gonti
Date Deposited: 27 Feb 2020 07:32
Last Modified: 27 Feb 2020 07:32
URI: http://repository.its.ac.id/id/eprint/75216

Actions (login required)

View Item View Item