Sistem Monitoring RH Di Tray Trap Silika Gel Kolom Water Scrubber System Pada Alat Purifikasi Biogas

Pirilina, Alfianti (2016) Sistem Monitoring RH Di Tray Trap Silika Gel Kolom Water Scrubber System Pada Alat Purifikasi Biogas. Diploma thesis, Institut Teknologi Sepuluh Nopember.

[thumbnail of 2413031037-Non_Degree.pdf]
Preview
Text
2413031037-Non_Degree.pdf - Accepted Version

Download (3MB) | Preview

Abstract

Biogas merupakan gas hasil penguraian zat-zat organik seperti daun-daun busuk dan kotoran sapi dalam kondisi anaerob. Komponen gas pembentuk biogas terdiri dari metana (CH4), karbon dioksida (CO2), hidrogen sulfida (H2S), amonia (NH3), hidrogen (H2), nitrogen (N2), karbon monoksida (CO) dan oksigen (O2). Namun beberapa komponen gas pembentuk biogas yaitu gas pengotor berupa H2O, H2S, CO2, dan partikulat harus dihilangkan untuk mencapai kualitas gas yang lebih baik. Oleh karena itu, dibuat suatu alat purifikasi biogas dengan menyemprotkan air dingin dengan noozle. Air yang disemprotkan dari noozle menimbulkan uap air yang ikut naik menuju output biogas sehingga untuk mengurangi kadar H2O tersebut dilakukan dengan cara melewatkan biogas pada suatu kolom yang terdiri dari silika gel. Sensor yang dipakai adalah DHT-22 sebagai sensor temperatur dan kelembaban, Arduino Uno R3 sebagai data program, Visual Studio 2013 sebagai interface monitoring data pada PC, serta XAMPP dan MySQL sebagai media akuisisi data. Berdasarkan hasil pengujian, didapatkan bahwa sistem monitoring kelembaban memiliki nilai ketidakpastian diperluas (Uexp) sebesar ±2,100 dengan tingkat kepercayaan 90%. Akurasi alat ukur kelembaban adalah 96,85%. Dari data hasil monitoring, penggunaan silika gel berfungsi dalam proses purifikasi biogas. Kelembaban dapat mempengaruhi kandungan dari biogas yang dikeluarkan terutama penurunan kandungan H2S karena semakin rendah suhu yang digunakan untuk mengurangi kadar H2S maka semakin tinggi kelembaban yang ada pada scrubber, sehingga memerlukan silika gel untuk mengurangi kelembaban tersebut.
========================================================================================================
Biogas is a gas from decomposition of organic substances such as rotting leaves and cow dung under anaerobic conditions. Forming gas component of biogas is composed of methane (CH4), carbon dioxide (CO2), hydrogen sulfide (H2S), ammonia (NH3), hydrogen (H2), nitrogen (N2), carbon monoxide (CO) and oxygen (O2). However, some components of biogas are gas-forming gas impurities such as H2O, H2S, CO2, and particulates must be removed to achieve a better quality gas. Therefore, created a biogas purification tool by spraying cold water with noozle. Water is sprayed from noozle cause water vapor to go up to the biogas output so as to reduce the levels of H2O is done by passing the biogas in a column consisting of silica gel. The sensor used is a DHT-22 as the temperature and humidity sensors, Arduino Uno R3 as program data, Visual Studio 2013 as a data monitoring interface on the PC, as well as media XAMPP and MySQL data acquisition. Based on test results, it was found that the moisture monitoring system has expanded uncertainty value (Uexp) of ± 2.100 with a confidence level of 90%. Accuracy of humidity measuring instrument is 96.85%. From the monitoring records, the use of silica gel to work in the biogas purification process. Humidity can affect the content of the biogas released mainly a decrease in H2S content because the lower temperatures used to reduce the H2S content, the higher the moisture contained in the scrubber, thus requiring silica gel to reduce the moisture. Keywords:

Item Type: Thesis (Diploma)
Additional Information: RSF 668.423 Pir s
Uncontrolled Keywords: Purifikasi biogas, Silika gel, Temperatur, Kelembaban
Subjects: T Technology > TA Engineering (General). Civil engineering (General) > TA593.35 Instruments, cameras, etc.
T Technology > TP Chemical technology > TP156 Crystallization. Extraction (Chemistry). Fermentation. Distillation. Emulsions.
T Technology > TP Chemical technology > TP359 Biogas
Divisions: Faculty of Industrial Technology > Physics Engineering > (D3) Diploma 3
Depositing User: Yeni Anita Gonti
Date Deposited: 30 Jun 2020 07:14
Last Modified: 30 Jun 2020 07:14
URI: http://repository.its.ac.id/id/eprint/76259

Actions (login required)

View Item View Item