The influence of feed temperature and strippers position on pressure temperature mass flow and control of crude distillation unit(CDU)

Júnior, Xavier Chiuaula (2016) The influence of feed temperature and strippers position on pressure temperature mass flow and control of crude distillation unit(CDU). Masters thesis, Institut Teknologi Sepuluh Nopember Surabaya.

[thumbnail of 2313201801-Master_Thesis.pdf]
Preview
Text
2313201801-Master_Thesis.pdf - Published Version

Download (2MB) | Preview

Abstract

Unit destilasi minyak mentah adalah unit pertama yang digunakan dalam industri penyulingan minyak.
Dari unit distilasi, fraksi minyak bumi seperti nafta, minyak tanah, solar dan
minyak gas dapat diperoleh untuk pasokan listrik dan sebagai umpan di industri lain. Tujuan dari
Makalah ini untuk mendapatkan suhu pengumpanan dan posisi penari telanjang yang dapat memberikan
keuntungan tertinggi di kilang. Simulator Aspen Plus digunakan untuk melakukan
simulasi. Temperatur tungku pada kolom Preflash dan posisi strippers
pada kolom Pipestil adalah variabel desain. Kualitas ujung yang ringan, berat
naphtha dan diesel dalam 95% ASTDMD86 ditetapkan konstan pada 130ᵒC, 190ᵒC dan
222ᵒC masing-masing. Kondisi optimum ditentukan berdasarkan maksimum
keuntungan dan itu terjadi ketika suhu dalam tungku kolom preflash
345ᵒC sedangkan posisi pengupas pada pipestil adalah S1p.5-4, S2p.14-13 dan S3p.1918
dengan
Sebuah
keuntungan
dari
USD54,93 / m³.
Tidak
penting
perubahan
dulu
ditemukan
di
CDU
Profil

kapan

suhu umpan atau posisi stripper diubah. Penyimpangan itu
terjadi normal sehingga operasi CDU memuaskan untuk semua kasus
==============================================================================================
The crude distillation units are the first units used in oil refinery industry.
From distillation units, petroleum fractions such as naphtha, kerosene, diesel and
gas oil can be obtained for power supply and as feed in other industries. The aim of
this paper is to get the feed temperature and strippers position which can provide
highest profit in the refinery. Aspen Plus simulator was used to perform the
simulation. The temperature of furnace on Preflash column and strippers position
on the Pipestil column are the design variables. The quality of light ends, heavy
naphtha and diesel in the 95% ASTDMD86 was set constant at 130ᵒC, 190ᵒC and
222ᵒC respectively. The optimum condition was determined based on the maximum
profit and it happened when the temperature in the furnace of preflash column was
345ᵒC while strippers’ position on pipestil was at S1p.5-4, S2p.14-13 and S3p.1918
with
a
profit
of
USD54.93/m³.
No
significant
changes
was
found
on
CDU
profile

when

the feed temperature or stripper position was changed. The deviation that
occurred was normal, therefore CDU operation was satisfying for all cases

Item Type: Thesis (Masters)
Additional Information: RTK 660.283 Jun t
Uncontrolled Keywords: Crude Distillation Unit (CDU), Stripper position, Optimization
Subjects: T Technology > TP Chemical technology
T Technology > TP Chemical technology > TP156 Crystallization. Extraction (Chemistry). Fermentation. Distillation. Emulsions.
Divisions: Faculty of Industrial Technology > Chemical Engineering > 24101-(S2) Master Thesis
Depositing User: EKO BUDI RAHARJO
Date Deposited: 07 Sep 2020 03:51
Last Modified: 29 Apr 2024 09:26
URI: http://repository.its.ac.id/id/eprint/81792

Actions (login required)

View Item View Item