Studi Eksperimen Tegangan Mooring Pada Floating Breakwater Dengan Variasi Slope Dan Porositas

Subakti, Rivardi Himawan (2021) Studi Eksperimen Tegangan Mooring Pada Floating Breakwater Dengan Variasi Slope Dan Porositas. Undergraduate thesis, Institut Teknologi Sepuluh Nopember.

[img] Text
04311640000004-Undergraduate_Thesis.pdf - Accepted Version
Restricted to Repository staff only until 1 April 2023.

Download (4MB) | Request a copy

Abstract

Pemecah gelombang lepas pantai dibedakan menjadi dua tipe yaitu fixed dan floating. Floating breakwater merupakan pilihan alternatif dari fixed breakwater karena keunggulannya dan beberapa tahun belakangan ini banyak dilakukan penelitian mengenai floating breakwater. Kekuatan mooring merupakan salah satu aspek dalam desain floating breakwater sehingga sangat penting untuk dibahas. Penelitian ini membahas pengaruh desain floating breakwater terhadap tegangan mooring. Tegangan mooring diperoleh berdasarkan pengujian desain floating breakwater dengan variasi sudut slope dan porositas menggunakan pemodelan fisik. Pemodelan fisik floating breakwater diuji di wave flume dengan menggunakan input gelombang regular. Hasil dari pengujian didapatkan tegangan maksimum terbesar terjadi pada floating breakwater dengan sudut slope 45o dan pori 0% yaitu 14,26 kN/m2. Kemudian untuk hasil tegangan maksimum terkecil terjadi pada floating breakwater dengan sudut slope 60o dan pori 5% yaitu 12,13 kN/m2. ====================================================================================================== Detached breakwater can be divided into two types, fixed and floating. Floating breakwater are an alternative choice of fixed breakwater because of their advantages and in recent years a lot of research has been conducted on floating breakwater. The strength of mooring is one aspect of floating breakwater design, so it is very important to discuss. This study discusses the effect of floating breakwater design on mooring tension. Mooring tension is obtained based on testing the floating breakwater design with slope and porosity variations using physical modeling. The physical modeling of floating breakwater was tested on the wave flume using regular wave. The results of the test show that the largest maximum tension occurs in floating breakwater with a slope angle of 45o and a pore of 0% is 14,26 kN/m2. Then for the results of the smallest maximum tension in the floating breakwater with a slope angle of 60o and a pore of 5% is 12,13 kN/m2.

Item Type: Thesis (Undergraduate)
Uncontrolled Keywords: Floating Breakwater, Pemodelan Fisik, Tegangan Mooring, Mooring Tension, Physical Modeling
Subjects: T Technology > TC Hydraulic engineering. Ocean engineering > TC203.5 Coastal engineering
T Technology > TC Hydraulic engineering. Ocean engineering > TC333 Breakwaters
Divisions: Faculty of Marine Technology (MARTECH) > Ocean Engineering > 38201-(S1) Undergraduate Thesis
Depositing User: Rivardi Himawan Subakti
Date Deposited: 26 Feb 2021 09:07
Last Modified: 26 Feb 2021 09:07
URI: https://repository.its.ac.id/id/eprint/82929

Actions (login required)

View Item View Item